Hydrogen-Free Plasma Nitriding to Enhance Wear and Corrosion Resistance of TiZrAlV Alloy

被引：5
作者：
Lv, J. W. [1 ]
Ai, X. Y. [2 ]
Zhang, B. [2 ]
Jing, Q. [2 ]
机构：
[1] Yantai Univ, Coll Nucl Equipment & Nucl Engn, Yantai 264005, Peoples R China
[2] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Hebei, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2024年 / 33卷 / 01期
关键词：
corrosion resistance; double-glow plasma; hardness; hydrogen-free nitriding; TiZrAlV alloy; wear resistance; POINT-DEFECT MODEL; MECHANICAL-PROPERTIES; TRIBOLOGICAL PROPERTIES; ANION VACANCIES; TI-6AL-4V ALLOY; TITANIUM-ALLOYS; SURFACE; TI; COATINGS; MICROSTRUCTURE;
D O I：
10.1007/s11665-023-08151-6
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A hydrogen-free surface nitriding process was proposed to enhance the wear properties of TiZrAlV alloy by using double-glow plasma. The structure, morphology, composition, hardness, tribological behavior and corrosion properties of nitrided TiZrAlV alloy have been systematically characterized. A dense and continuous nitrided layer, with a thickness of 110 mu m, was formed on the surface of TiZrAlV alloy, mainly containing TiN, and Ti2N phases. The surface hardness of nitrided TiZrAlV alloy was 1437HV, which is 4 times higher than that of as-received alloy. The formation of high-hardness nitrides phases results in remarkable amelioration in specific wear rate and wear resistance of TiZrAlV alloy after nitriding. Moreover, the corrosion resistance of nitrided TiZrAlV alloy, measured in 1 M HCl and 3.5 wt.% NaCl solutions, has been significantly increased. The nitriding treatment reduced the relative proportion of the weight loss after being immersed in 2 M HCl solution.
引用
收藏
页码：54 / 63
页数：10
相关论文
共 39 条
[1]   Influence of phase composition and microstructure on corrosion behavior of laser based Ti-Co-Ni ternary coatings on Ti-6Al-4V alloy [J].
Adesina, Olanrewaju Seun ;
Obadele, Babatunde Abiodun ;
Farotade, Gabriel Ayokunle ;
Isadare, Dayo Adeyemi ;
Adediran, Adeolu Adesoji ;
Ikubanni, Peter Pelumi .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 827
[2]   Plasma nitriding on titanium surface for adhesion promotion [J].
Ahmed, S. ;
Chakrabarty, D. ;
Bhowmik, S. ;
Mukherjee, S. ;
Rane, R. .
SURFACE ENGINEERING, 2015, 31 (08) :616-622
[3]   Hydrogen-free nitriding of ZrTiAlV by double glow plasma discharge improving the wear resistance [J].
Ai, X. Y. ;
Lin, H. L. ;
Zhang, B. ;
Lv, J. W. ;
Jing, Q. ;
Liu, R. P. .
MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (11) :1303-1308
[4]   On the passive and semiconducting behavior of severely deformed pure titanium in Ringer's physiological solution at 37 °C: A trial of the point defect model [J].
Ansari, Ghazaleh ;
Fattah-alhosseini, Arash .
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2017, 75 :64-71
[5]   Comparison on electrochemical corrosion performances of arc and laser thermal sprayed Al-Ti-Ni coatings in marine environment [J].
Chen Haixiang ;
Kong Dejun .
MATERIALS CHEMISTRY AND PHYSICS, 2020, 251
[6]   Plasma Electrolytic Oxidation (PEO) coatings on a zirconium alloy for improved wear and corrosion resistance [J].
Chen, Y. ;
Nie, X. ;
Northwood, D. O. .
TRIBOLOGY AND DESIGN, 2010, :183-194
[7]   The influence of chloride and sulphate ions on the corrosion behavior of Ti and Ti-6Al-4V alloy in oxalic acid [J].
Fekry, A. M. .
ELECTROCHIMICA ACTA, 2009, 54 (12) :3480-3489
[8]   Microstructure and microhardness of a novel TiZrAlV alloy by laser gas nitriding at different laser powers [J].
Feng, Zhi-Hao ;
Sun, Xin-Yang ;
Han, Peng-Biao ;
Fu, Hang ;
Dong, Hui-Cong ;
Guo, Shun ;
Su, Ru ;
Li, Jian-Hui .
RARE METALS, 2020, 39 (03) :270-278
[9]   Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in hydrochloric acid solutions [J].
Galvanetto, E ;
Galliano, FP ;
Fossati, A ;
Borgioli, F .
CORROSION SCIENCE, 2002, 44 (07) :1593-1606
[10]   THE EFFECT OF ANION VACANCIES ON THE TRIBOLOGICAL PROPERTIES OF RUTILE (TIO2-X) .2. EXPERIMENTAL-EVIDENCE [J].
GARDOS, MN ;
HONG, HS ;
WINER, WO .
TRIBOLOGY TRANSACTIONS, 1990, 33 (02) :209-220
1234