Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

被引:8
|
作者
Lin, Fei [1 ]
Ren, Mengyuan [1 ]
Jia, Fanghui [1 ]
Huo, Mingshuai [1 ]
Yang, Ming [2 ]
Chen, Zhixin [1 ]
Jiang, Zhengyi [1 ]
机构
[1] Univ Wollongong, Sch Mech Mat Mechatron & Biomed Engn, Wollongong, NSW 2522, Australia
[2] Tokyo Metropolitan Univ, Grad Sch Syst Design, Hino, Tokyo 1910065, Japan
基金
澳大利亚研究理事会;
关键词
Al matrix composites; Powder metallurgy; Microstructure; Mechanical properties; NANOPARTICLES;
D O I
10.1016/j.coco.2023.101529
中图分类号
TB33 [复合材料];
学科分类号
摘要
Heterostructured Al/10 vol% (TiC-GNPs) composites were produced by powder metallurgy (PM) with different TiC-to-GNPs volume ratios. As the TiC-to-GNPs ratio decreases, the improved dispersion of TiC in the matrix is achieved and the heterostructure of the composite is optimised due to the decreased TiC fraction and increased interaction between TiC and GNPs. Besides, compressive properties of the composite are improved significantly, and a balance of the significantly increased strength (sigma YS of 481.0 MPa and sigma UCS of 651.4 MPa) and reasonably remained ductility (epsilon f of 10.9%) is achieved in the Al matrix composite reinforced with 8.5 vol% TiC and 1.5 vol % GNPs (A4) based on the optimised TiC-to-GNPs ratio and optimised heterostructure. However, the compressive properties decrease dramatically when the GNPs content reaches 2 vol% because of the presence of GNPs agglomerates.
引用
收藏
页数:6
相关论文
共 28 条
  • [21] Al2O3 nanoparticle reinforced heterogeneous CrCoNi-matrix composites with improved strength-ductility synergy
    Luo, X.
    Yang, L.
    Zhao, A. W.
    Lu, W. J.
    Gan, B.
    Yang, Y. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832
  • [22] STRENGTH-DUCTILITY RELATIONSHIP OF SQUEEZED IN-SITU (ZrB2 + Al3Zr/Al2O3) NANOPARTICLES-REINFORCED 6016Al MATRIX COMPOSITES
    Dar, Soban Muddassir
    Zhao, Yutao
    Kai, Xizhou
    Xu, Zhuangzhuang
    Guan, Chuang
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (03) : 1650 - 1660
  • [23] Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites
    Lin, Fei
    Ren, Mengyuan
    Wu, Hui
    Jia, Fanghui
    Lu, Yao
    Huo, Mingshuai
    Yang, Ming
    Chen, Zhixin
    Jiang, Zhengyi
    TRIBOLOGY INTERNATIONAL, 2023, 177
  • [24] Strength-Ductility Relationship of Squeezed In-Situ (ZrB2 + Al3Zr/Al2O3) Nanoparticles-Reinforced 6016Al Matrix Composites
    Soban Muddassir Dar
    Yutao Zhao
    Xizhou Kai
    Zhuangzhuang Xu
    Chuang Guan
    International Journal of Metalcasting, 2023, 17 : 1650 - 1660
  • [25] Achieving high strength in graphene nanoplatelets reinforced Mg-Zn-Mn matrix composites via liquid-state molding technology and low temperature deformation process
    Chen, Yuhao
    Nie, Kaibo
    Liu, Zhilong
    Deng, Kunkun
    Shi, Quanxin
    Wang, Zedong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 968
  • [26] Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network
    Zhang, Xiang
    Shi, Chunsheng
    Liu, Enzuo
    He, Fang
    Ma, Liying
    Li, Qunying
    Li, Jiajun
    Bacsa, Wolfgang
    Zhao, Naiqin
    He, Chunnian
    NANOSCALE, 2017, 9 (33) : 11929 - 11938
  • [27] Spark plasma forging and network size effect on strength-ductility trade-off in graphene reinforced Ti6Al4V matrix nanocomposites
    Shang, Caiyun
    Zhang, Faming
    Xiong, Yifeng
    Wan, Qifa
    Chen, Feng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 862
  • [28] Achieving concurrent strength-ductility combination and robust anti-wear performance in W@WC/Fe core-shell bar-reinforced iron matrix composites
    Bai, Haiqiang
    Yang, Tailong
    Wang, Lei
    Kang, Ling
    He, Mingyue
    Zhuang, Weijun
    Zhong, Lisheng
    Wan, Zengli
    Xu, Yunhua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 930