Enhancing the strength of adhesively bonded single-lap composite joints using fiber fabrics

被引：5
作者：
Thirunavukarasu, Avinash [1 ]
Sikarwar, Rahul Singh [1 ]
机构：
[1] Vellore Inst Technol, Sch Mech Engn SMEC, Vellore 632014, India
来源：
MATERIALS LETTERS | 2024年 / 357卷
关键词：
Composite materials; Polymer; Adhesive; Lap-joints; Laminates;
D O I：
10.1016/j.matlet.2023.135664
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study focused on enhancing the strength of adhesively bonded single-lap composite joints (ABSLCJ) using different fiber fabrics such as unidirectional and bidirectional glass-fiber, and bidirectional carbon-fiber, under tensile, shear, flexural, and fixed-free vibration. The impregnation of the carbon-fiber fabric in adhesive increases the strength of the joint. In comparison to only adhesive, the adhesive joint carbon-fiber fabric improved the tensile, flexural and stiffness by 23.93 %, 31 %, and 19.6 %.
引用
收藏
页数：5
相关论文
共 10 条
[1]   The effect of fiber length and structure on joint strength in bonded joints with fiber-reinforced composite adhesive [J].
Calik, Ahmet ;
Akpinar, Salih .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2023, 124
[2]   Joint strength optimization by the mixed-adhesive technique [J].
da Silva, Lucas F. M. ;
Lopes, Maria Joao C. Q. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2009, 29 (05) :509-514
[3]   Enhancing strength and stiffness of composite joint through co-cure technique [J].
Dhilipkumar, Thulasidhas ;
Rajesh, Murugan .
COMPOSITES COMMUNICATIONS, 2021, 27
[4]   Influence of GNP nanoparticles on shear and dynamic behaviour of flat-joggle-flat composite joints [J].
Hiremath, Vinayak S. ;
Reddy, D. Mallikarjuna .
MATERIALS LETTERS, 2023, 348
[5]   Experimental Analysis of the Bondline Stress Concentrations to Characterize the Influence of Adhesive Ductility on the Composite Single Lap Joint Strength [J].
Katnam, K. B. ;
Dhote, J. X. ;
Young, T. M. .
JOURNAL OF ADHESION, 2013, 89 (06) :486-506
[6]   Effect of nylon fabric reinforcement on the mechanical performance of adhesive joints made between glass and GFRP [J].
Munafo, P. ;
Marchione, F. ;
Chiappini, G. ;
Marchini, M. .
FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2022, 16 (59) :89-104
[7]   Review on techniques to improve the strength of adhesive joints with composite adherends [J].
Shang, X. ;
Marques, E. A. S. ;
Machado, J. J. M. ;
Carbas, R. J. C. ;
Jiang, D. ;
da Silva, L. F. M. .
COMPOSITES PART B-ENGINEERING, 2019, 177
[8]  
Sharun Hegde B., 2019, Mater. Today: Proc., V658, P749, DOI [10.1016/j.matpr.2019.07.749, DOI 10.1016/J.MATPR.2019.07.749]
[9]   Failure analysis of GFRP single lap joints tailored with a combination of tough epoxy and hyperelastic adhesives [J].
Srinivasan, D. V. ;
Ravichandran, V. ;
Idapalapati, S. .
COMPOSITES PART B-ENGINEERING, 2020, 200
[10]   Static compression testing CFRP single-lap composited joints using X-ray μCT [J].
Zhang, Hongzhuang ;
Li, Changyou ;
Dai, Weibing ;
Liu, Yuzhuo ;
Tian, Sen ;
Huang, Wenchao ;
Jia, Dawei ;
He, David ;
Zhang, Yimin .
COMPOSITE STRUCTURES, 2020, 234
1