Temperature damping capacity and microstructure evolution of Mg-Al-Zn-Sn alloy

The temperature damping capacities of Mg-3Al-1Zn-xSn (x1/43, 6, 9) alloys were investigated using a Dynamic Mechanical Thermal Analyzer (DMA) under varied loading frequencies and Sn concentrations. The addition of Sn resulted in a leftward shift of the P1 dislocation damping peak around 80 & DEG;C and a rightward shift of the P3 peak around 220 & DEG;C, which were attributed to the second phases in the vicinity of grain boundaries. By combining the Granato-Lu & BULL; cke model and the Peguin model, the damping curves were analyzed, and the temperature damping mechanism of Mg-3Al-1Zn-xSn alloy was summarized. Before 220 & DEG;C, the addition of Sn significantly enhanced the damping capacity at different frequencies, which was attributed to the increased of point defects and precipitates. The damping mechanism was dominated by microplastic internal friction in the later part of the test. There is a negative correlation between frequency and damping. The observation of microstructures suggested that the dynamic recrystallization, the twining, and the non-basal slipping systems were the sources of the microplastic damping capacity. The dynamic recrystallization mechanism owing to cyclic loading was identified. & COPY; 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).