Influence of Basalt/Polypropylene Fiber on Permeability and Uniaxial Compressive Properties of Waste Tire Rubberized Concrete

The rubber particles obtained from the grinding of waste tires can replace a portion of the fine aggregates in concrete, thus effectively reducing the level of environmental damage and saving resources. However, when concrete is mixed with rubber, it greatly reduces its strength. In this study, by introducing basalt fiber (BF) and polypropylene fiber (PF) as modified materials in rubberized concrete, the influence of the fiber type/volume ratio on the slump, water absorption, static uniaxial compression, and permeability of the rubberized concrete was tested. The axial compression stress-strain relationship was analyzed, the effect of the fiber type/volume ratio on the energy dissipation of the rubberized concrete during uniaxial compression was expounded, and a stress-strain constitutive model under uniaxial compression was established. The test results showed that the fiber reduces the fluidity and water absorption of the rubberized concrete. Compared with the polypropylene fiber, the basalt fiber increased the strength of the rubberized concrete, while the polypropylene fiber mainly inhibited the expansion and penetration of the macroscopic crack of the rubberized concrete. The mixing of the basalt fiber and polypropylene fiber significantly decreased the release rate of the elastic strain energy of the rubberized concrete, increased the dissipation energy, and thus improved its ductility and toughness. During a loading process under confining pressure, the permeability of the tested specimen decayed exponentially, and the fiber greatly enhanced the anti-permeability of the rubber concrete.