Outstanding Compatibility of Hard-Carbon Anodes for Sodium-Ion Batteries in Ionic Liquid Electrolytes

被引:4
|
作者
Maresca, Giovanna [1 ,2 ]
Petrongari, Angelica [3 ]
Brutti, Sergio [3 ]
Battista Appetecchi, Giovanni [1 ]
机构
[1] ENEA, Mat & Physicochem Proc Tech Unit, SSPT, PROMAS,MATPRO, Via Anguillarese 301, I-00123 Rome, Italy
[2] Univ Roma La Sapienza, Dept Basic & Appl Sci Engn, Piazzale Aldo Moro 5, I-00185 Rome, Italy
[3] Univ Roma La Sapienza, Dept Chem, Piazzale Aldo Moro 5, I-00185 Rome, Italy
基金
欧盟地平线“2020”;
关键词
sodium-ion batteries; ionic liquids; hard carbon; electrolytes; compatibility; INTERPHASE SEI; HIGH-CAPACITY; LITHIUM; PERFORMANCE; INSERTION;
D O I
10.1002/cssc.202300840
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Hard carbons (HC) from natural biowaste have been investigated as anodes for sodium-ion batteries in electrolytes based on 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([EMI][FSI]) and N-trimethyl-N-butylammonium bis(fluorosulfonyl)imide ([N1114][FSI]) ionic liquids. The Na+ intercalation process has been analyzed by cyclic voltammetry tests, performed at different scan rates for hundreds of cycles, in combination with impedance spectroscopy measurements to decouple bulk and interfacial resistances of the cells. The Na+ diffusion coefficient in the HC host has been also evaluated via the Randles-Sevcik equation. Battery performance of HC anodes in the ionic liquid electrolytes has been evaluated in galvanostatic charge/discharge cycles at room temperature. The evolution of the SEI (solid electrochemical interface) layer grown on the HC surface has been carried out by Raman spectroscopy. Overall the sodiation process of the HC host is highly reversible and reproducible. In particular, a capacity retention exceeding 98 % of the initial value has been recorded in[N1114][FSI] electrolytes after more than 1500 cycles with a coulombic efficiency above 99 %, largely beyond standard carbonate-based electrolytes. Raman, transport properties and impedance confirms that ILs disclose the formation of SEI layers with superior ability to support the reversible Na+ intercalation with the possible minor contributions from the EMI+cation. The 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([EMI][FSI]) and, especially, N-trimethyl-N-butylammonium bis(fluorosulfonyl)imide ([N1114][FSI]) have shown very good compatibility towards hard carbon electrode with excellent cycling behavior, which represents one of the best results obtained for hard carbon electrodes in ionic liquid electrolytes, exceeding even that exhibited in organic electrolytes, making them rather appealing for the realization of safe, reliable and highly performing Na-ion cells.image
引用
收藏
页数:10
相关论文
共 50 条
  • [11] A life cycle assessment of hard carbon anodes for sodium-ion batteries
    Liu, Haoyu
    Xu, Zhen
    Guo, Zhenyu
    Feng, Jingyu
    Li, Haoran
    Qiu, Tong
    Titirici, Magdalena
    PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2021, 379 (2209):
  • [12] Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
    Bommier, Clement
    Luo, Wei
    Gao, Wen-Yang
    Greaney, Alex
    Ma, Shengqian
    Ji, Xiulei
    CARBON, 2014, 76 : 165 - 174
  • [13] Synthesis strategies of hard carbon anodes for sodium-ion batteries
    Yin, Jian
    Zhang, Ye Shui
    Liang, Hanfeng
    Zhang, Wenli
    Zhu, Yunpei
    MATERIALS REPORTS: ENERGY, 2024, 4 (02):
  • [14] Ionic liquid electrolytes for sodium-ion batteries to control thermal runaway
    Sirengo, Keith
    Babu, Aswathy
    Brennan, Barry
    Pillai, Suresh C.
    JOURNAL OF ENERGY CHEMISTRY, 2023, 81 : 321 - 338
  • [15] Recent Advances in Carbon Anodes for Sodium-Ion Batteries
    Zhang, Tengfei
    Li, Chen
    Wang, Fan
    Noori, Abolhassan
    Mousavi, Mir F.
    Xia, Xinhui
    Zhang, Yongqi
    CHEMICAL RECORD, 2022, 22 (10)
  • [16] Coaxial Hard Carbon-coated Carbon Nanotubes as Anodes for Sodium-ion Batteries
    Feng, Shan
    Chen, Jialu
    Niu, Xingyu
    Feng, Xiaomiao
    Zhao, Jin
    CHEMNANOMAT, 2022, 8 (10)
  • [17] Gravure-Printed Anodes Based on Hard Carbon for Sodium-Ion Batteries
    Montanino, Maria
    Paoletti, Claudia
    De Girolamo Del Mauro, Anna
    Sico, Giuliano
    BATTERIES-BASEL, 2024, 10 (11):
  • [18] A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries: A Comparative Study
    Gond, Ritambhara
    Asfaw, Habtom Desta
    Hosseinaei, Omid
    Edstrom, Kristina
    Younesi, Reza
    Naylor, Andrew J.
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2021, 9 (37): : 12708 - 12717
  • [19] Understanding the Electrochemical Compatibility and Reaction Mechanism on Na Metal and Hard Carbon Anodes of PC-Based Electrolytes for Sodium-Ion Batteries
    Pan, Kanghua
    Lu, Haiyan
    Zhong, Faping
    Ai, Xinping
    Yang, Hanxi
    Cao, Yuliang
    ACS APPLIED MATERIALS & INTERFACES, 2018, 10 (46) : 39651 - 39660
  • [20] Hard carbon anodes for sodium-ion batteries: Dependence of the microstructure and performance on the molecular structure of lignin
    Meng, Qingwei
    Chen, Binyi
    Jian, Wenbin
    Zhang, Xiaoshan
    Sun, Shirong
    Wang, Tiejun
    Zhang, Wenli
    JOURNAL OF POWER SOURCES, 2023, 581