ZnO-ZnFe2O4 Catalyst for Hydrogen Production from Methanol Steam Reforming

In this study, ZnFe2O4 and ZnO-ZnFe2O4 catalysts were prepared using the glycine-nitrate process (GNP). The prepared ZnFe2O4 and ZnO-ZnFe2O4 catalyst powders were characterized using a scanning electron microscope, transmission electron microscope, XRD diffraction studies, and selected area diffraction pattern studies. In addition, the specific surface area was measured using a Brunauer-Emmett-Teller specific surface area analysis. The hydrogen reduction in different temperature ranges was analyzed using the H-2 temperature-programmed reduction technique. The specific surface area of the ZnFe2O4 was 5.66 m(2)/g, and the specific surface area of the ZnO-ZnFe2O4 was 8.20 m(2)/g at a G/N ratio of 1.5 and at a G/N ratio of 1.7, respectively. The specific surface area of the ZnFe2O4 was 6.03 m(2)/g, and the specific surface area of the ZnO-ZnFe2O4 was 11.67 m(2)/g. The ZnFe2O4 and ZnO-ZnFe2O4 were found to have the best catalytic effect at 500 degrees C. In particular, the highest H-2 generation rate of the ZnO-ZnFe2O4 (GN = 1.7) at 500 degrees C was 7745 mL STP min(-1) g-cat(-1). Moreover, the ZnO-ZnFe2 O-4 catalyst demonstrated good H-2 selectivity and stability during the process of steam reforming methanol. Therefore, the ZnO-ZnFe2O4 catalyst powder exhibited high catalytic activity due to the good dispersibility of the ZnO, which increased the specific surface area of the catalyst. In the future, the catalyst can be applied to the steam reforming of methanol for industrial purposes.