Analysis of Cogging Torque of Permanent Magnet Motors Under Mixed-Eccentricity and Manufacturing Tolerances

被引：3
|
作者：
Zhao, Yue [1 ]
Zhang, Shuo [1 ]
Zhang, Chengning [1 ]
Yang, Guohui [2 ]
Yang, Yongxi [1 ]
机构：
[1] Beijing Inst Technol, Sch Mech & Vehicle Engn, Beijing 100811, Peoples R China
[2] Beijing Inst Precis Mechatron & Controls, Lab Aerosp Serv Actuat & Transmiss, Beijing 100076, Peoples R China
来源：
IEEE ACCESS | 2024年 / 12卷
关键词：
Rotors; Torque; Forging; Manufacturing; Harmonic analysis; Stators; Analytical models; Permanent magnet motors; mixed-eccentricity (ME); manufacturing tolerances; additional harmonic components (AHCs) of cogging torque; robust design; ROTOR ECCENTRICITY; SYNCHRONOUS MOTORS; OPTIMIZATION; FAULT; MODEL; POLE;
D O I：
10.1109/ACCESS.2024.3351174
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The rotor eccentricity and manufacturing tolerances caused by unavoidable uncertainties in the process of manufacturing deteriorate the cogging torque of permanent magnet (PM) motors. To guide the design and optimization of PM motors, this paper proposes an analytical model to reveal the effects of mixed-eccentricity (ME) and manufacturing tolerances on the harmonic components of cogging torque. A coefficient is introduced to intuitively characterize the impact of ME on the distribution of the air-gap length. Then a modified analytical model is developed to theoretically identify the additional harmonic components (AHCs) of cogging torque associated with the eccentricity and tolerances. And the main AHCs of cogging torque are quantitatively determined through the finite element method. Finally, suggestions to improve the robustness considering uncertainties by selecting pole/slot combination and pole-arc ratio are proposed.
引用
收藏
页码：6672 / 6683
页数：12
相关论文
共 50 条
  • [1] Modeling and Fast Evaluation of Cogging Torque in Halbach Array Surface-Mounted Permanent Magnet Motors Considering Manufacturing Tolerances
    Wang, Peng
    Zhang, Zhuoran
    Liao, Chendong
    Li, Jincai
    Xie, Xuekun
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2025, 61 (02) : 2934 - 2946
  • [2] Methods to Improve the Cogging Torque Robustness Under Manufacturing Tolerances for the Permanent Magnet Synchronous Machine
    Yang, Yongxi
    Bianchi, Nicola
    Bramerdorfer, Gerd
    Zhang, Chengning
    Zhang, Shuo
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2021, 36 (03) : 2152 - 2162
  • [3] Analysis of Cogging Torque in Surface Permanent Magnet Machine with Manufacturing Tolerances
    Wu, Leilei
    Qu, Ronghai
    Song, Bao
    Bi, Haisheng
    Jing, Ou
    Yang, Guowei
    Du, Chengfei
    IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2015, : 4732 - 4737
  • [4] Analysis of cogging torque caused by manufacturing tolerances of surface-mounted permanent magnet synchronous motor for electric power steering
    Kim, Ji-Min
    Yoon, Myung-Hwan
    Hong, Jung-Pyo
    Kim, Sung-Il
    IET ELECTRIC POWER APPLICATIONS, 2016, 10 (08) : 691 - 696
  • [5] Analytical Model for Cogging Torque Calculation in Surface-Mounted Permanent Magnet Motors With Rotor Eccentricity and Magnet Defects
    Tong, Wenming
    Li, Shiqi
    Pan, Xuelong
    Wu, Shengnan
    Tang, Renyuan
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2020, 35 (04) : 2191 - 2200
  • [6] Cogging Torque Minimization Strategies in Interior Permanent Magnet Synchronous Motors
    Bahrami-Fard, Milad
    Liang, Jingchen
    Chen, Pengyuan
    Hair, Colbey
    Moallem, Mehdi
    Pekarek, Steven
    Fahimi, Babak
    IEEE ACCESS, 2025, 13 : 49597 - 49610
  • [7] Influence of Manufacturing Tolerance in Ring Magnet on Cogging Torque of Surface Permanent Magnet Synchronous Machine
    Du, Jinwen
    Zhong, Rui
    Wu, Zhongze
    Hua, Wei
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2024, 39 (02) : 1301 - 1313
  • [8] Robust design for reducing cogging torque in surface-mounted permanent magnet synchronous motor considering tolerances of sub-components
    Lee, Byeong-Hwa
    Jung, Jae-Woo
    IET ELECTRIC POWER APPLICATIONS, 2020, 14 (03) : 448 - 456
  • [9] A New Harmonic Current Injection Technique to Reduce Cogging Torque in Axial Flux Permanent Magnet Motors
    Girgin, M. Tetik
    Guven, M. K.
    Aydin, M.
    IEEE TRANSACTIONS ON MAGNETICS, 2022, 58 (02)
  • [10] Compensation for the cogging torque of permanent magnet synchronous motors
    Liu, Chengjun
    Zhang, Hui
    Zou, Jibin
    Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2007, 22 (07): : 131 - 135
12345