Enhanced dechlorination of 2,4-dichlorophenol using nanorod palygorskite-loaded Fe/Ni nanoparticles: Performance evaluation, influencing factors and action mechanism of Fe and Ni

The basic structural unit of palygorskite (P) consists of rod-shaped crystals with a diameter ranging from 20 to 70 nm. However, due to strong hydrogen bonding and electrostatic forces, most palygorskite rod crystals tend to aggregate, limiting its nanomaterial properties in practical application. To address this limitation, the study focused on dissociating palygorskite aggregates and incorporating them into nanorod palygorskite-loaded Fe/Ni bimetallic nanoparticles (nP-nFe/Ni) synthesis. This approach facilitated the dissociation of palygorskite aggregates and enabled the dispersion of Fe/Ni nanoparticles by palygorskite nanorods. The results revealed that the BET specific surface area of nP-nFe/Ni was significantly higher at 86.17 m2/g compared to 33.62 m2/g for nFe/Ni. Consequently, the dechlorination efficiency of nP-nFe/Ni for 2,4-dichlor-ophenol (2,4-DCP) at 120 min was 22.4% higher than that of nFe/Ni, despite nP-nFe/Ni con-taining only 35.1% of the Fe content found in nFe/Ni at the same dosage. Moreover, it was observed that acidic conditions favor maximum dichlorination, while higher temperatures enhance the dechlorination rate. The action mechanism of Fe was identified as the generation of H2, which is catalyzed by Ni to form active hydrogen (H*) that attack the C-Cl bonds of 2,4-DCP for hydrodechlorination. Ni played a vital role in catalyzing H2 conversion to H* , accelerating H2 production by Fe, and inhibiting Fe passivation. These findings are crucial for the application of nano iron technology and nano-scale palygorskite in water and wastewater treatment.