N-dodecane partial oxidative reforming in gliding arc discharge plasma and kinetic model

被引:6
作者
Wang, Baowei [1 ]
Xu, Lijun [1 ]
Cheng, Yi [1 ]
Liu, Shize [1 ]
Zou, Jijun [1 ]
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Key Lab Green Chem Technol, Minist Educ, Tianjin 300072, Peoples R China
关键词
Hydrogen; N-dodecane; 0-D model; Partial oxidative reforming; Gliding arc discharge; Plasma kinetics; IN-LIQUID PLASMA; HYDROGEN-PRODUCTION; ATMOSPHERIC-PRESSURE; METHANE; FUEL; HYDROCARBONS; TOLUENE; GAS; COGENERATION; TEMPERATURE;
D O I
10.1016/j.ijhydene.2023.11.103
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A gliding arc discharge (GAD) plasma reactor was developed for partial oxidative reforming (POR) H2 produc-tion. Air was used as carrier gas and oxidant. The effects of the molar ratio of oxygen to carbon(O/C), input power and residence time on POR reaction were investigated. Under O/C ratio 0.75, input power 35 W and residence time 35 s, the energy yield of H2 was 68.7 L/kWh and the main products were H2 and CO. The GAD plasma was diagnosed with OES. A zero-dimensional(0-D) reaction kinetic model of was established. The simulation results were consistent with the experimental ones. The mechanism of C12H26 conversion, the gen-eration and consumption of products were discussed in detail. The experiment results were in good agreement with the simulated ones. The primary path of n-dodecane conversion was the direct cracking reaction and H2 mainly derived from the recombination reaction between H atom and CH4, C3H6 and C2H6.
引用
收藏
页码:958 / 969
页数:12
相关论文
共 62 条
  • [41] Non-thermal gliding-arc plasma reforming of dodecane and hydroprocessed renewable diesel
    Piavis, William
    Turn, Scott
    Mousavi, S. M. Ali
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (39) : 13295 - 13305
  • [42] Salahshoor S, 2022, Int J Hydrog Energy, DOI [10.1016/j.ijhydene.2022.08.202, DOI 10.1016/J.IJHYDENE.2022.08.202]
  • [43] Advances in reforming and partial oxidation of hydrocarbons for hydrogen production and fuel cell applications
    Sengodan, Sivaprakash
    Lan, Rong
    Humphreys, John
    Du, Dongwei
    Xu, Wei
    Wang, Huanting
    Tao, Shanwen
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2018, 82 : 761 - 780
  • [44] Effect of introducing a steam pipe to n-dodecane decomposition by in-liquid plasma for hydrogen production
    Shiraishi, Ryoya
    Nomura, Shinfuku
    Toyota, Hiromichi
    Mukasa, Shinobu
    Amano, Yuki
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (31) : 16248 - 16256
  • [45] N-Decane Reforming by Gliding Arc Plasma in Air and Nitrogen
    Song, Feilong
    Wu, Yun
    Xu, Shida
    Yang, Xingkui
    Xuan, Yuanbo
    [J]. PLASMA CHEMISTRY AND PLASMA PROCESSING, 2020, 40 (06) : 1429 - 1443
  • [46] MODERN AND PROSPECTIVE TECHNOLOGIES FOR HYDROGEN-PRODUCTION FROM FOSSIL-FUELS
    STEINBERG, M
    CHENG, HC
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 1989, 14 (11) : 797 - 820
  • [47] Hydrogen from coal gasification: An economical pathway to a sustainable energy future
    Stiegel, GJ
    Ramezan, M
    [J]. INTERNATIONAL JOURNAL OF COAL GEOLOGY, 2006, 65 (3-4) : 173 - 190
  • [48] The editors of encyclopaedia britannica, 2023, Diesel fuel
  • [49] Plasma dry reforming of methane in an atmospheric pressure AC gliding arc discharge: Co-generation of syngas and carbon nanomaterials
    Tu, Xin
    Whitehead, J. Christopher
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (18) : 9658 - 9669
  • [50] Hydrogen-rich gas production by steam reforming of n-dodecane. Part II: Stability, regenerability and sulfur poisoning of low loading Rh-based catalyst
    Vita, A.
    Italiano, C.
    Pino, L.
    Lagana, M.
    Recupero, V.
    [J]. APPLIED CATALYSIS B-ENVIRONMENTAL, 2017, 218 : 317 - 326