Novel integration between propane pre-cooled mixed refrigerant LNG process and concentrated solar power system based on supercritical CO2 power cycle

被引:3
作者
Sleiti, Ahmad K. [1 ]
Al-Ammari, Wahib A. [1 ]
机构
[1] Qatar Univ, Coll Engn, Dept Mech & Ind Engn, Doha, Qatar
关键词
Propane pre-cooled mixed refrigerant; (C3MR); LNG; Concentrated solar power; Thermoeconomic analysis; Exergy analysis; SupercriticalCO(2) power cycles; GAS LIQUEFACTION PROCESS; THERMODYNAMIC ANALYSIS; MULTIOBJECTIVE OPTIMIZATION; EXERGOECONOMIC ANALYSIS; BRAYTON CYCLES; RANKINE-CYCLE; DESIGN; ENERGY; CONFIGURATION; TECHNOLOGIES;
D O I
10.1016/j.egyr.2023.04.012
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Liquefaction of natural gas (LNG) is an energy-intensive process with large CO2 emissions. This study addresses these problems by introducing a novel hybrid integration between the propane pre-cooled mixed-refrigerant (C3MR) liquefaction process and concentrated solar power (CSP), utilizing an intercooled supercritical CO2 power block. The proposed system is designed to minimize or eliminate the need for thermal energy storage (TES) and reduce CO2 emissions while providing economic benefits. These benefits are obtained mainly by recovering the cold energy of the flash-gas of the C3MR process through the precooling process of the sCO(2) cycle. Then, the flash-gas is stored and combusted (using an auxiliary heater (AH)) at nighttime or when CSP is insufficient to meet the power demand. Five integration cases are evaluated from energetic, exergetic, economic, and environmental points of view: the sCO(2) cycle is driven by CSP and its thermal energy storage (TES) without AH in Case-1, by CSP+TES+AH in Case-2 to Case-4 with different contribution from TES and AH, and by CSP+AH without TES in Case-5. In addition, this study optimizes the operating parameters of the hybrid system to further enhance its economic and environmental benefits. The proposed system reduces the CSP field size, minimizes or eliminates the need for TES, and reduces or eliminates CO2 emissions. The optimized results show that Case-2 and Case-5 reduced the levelized cost of electricity from 14.16(sic)/kWh to 10.35(sic)/kWh and 8.19(sic)/kWh, respectively, and reduced the CO2 emissions by 86% and 36%. This study contributes to the field by introducing a novel hybrid integration between the C3MR process and CSP system, providing thorough evaluations of its performance and benefits, and providing significant benefits to the decarbonization strategies of LNG and other industrial processes. (c) 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
引用
收藏
页码:4872 / 4892
页数:21
相关论文
共 50 条
  • [31] Investigation of leakage reinjection system for supercritical CO2 power cycle using heat pump
    Muhammad, Hafiz Ali
    Lee, Beomjoon
    Lee, Gilbong
    Cho, Junhyun
    Baik, Young-Jin
    RENEWABLE ENERGY, 2019, 144 : 97 - 106
  • [32] Integration of the steam cycle and CO2 capture process in a decarbonization power plant
    Xu, Gang
    Hu, Yue
    Tang, Baoqiang
    Yang, Yongping
    Zhang, Kai
    Liu, Wenyi
    APPLIED THERMAL ENGINEERING, 2014, 73 (01) : 277 - 286
  • [33] Optimal integration of recompression supercritical CO2 Brayton cycle with main compression intercooling in solar power tower system based on exergoeconomic approach
    Ma, Yuegeng
    Morozyuk, Tatiana
    Liu, Ming
    Yan, Junjie
    Liu, Jiping
    APPLIED ENERGY, 2019, 242 : 1134 - 1154
  • [34] Integration of chemical looping combustion and supercritical CO2 cycle for combined heat and power generation with CO2 capture
    Chen, Shiyi
    Soomro, Ahsanullah
    Yu, Ran
    Hu, Jun
    Sun, Zhao
    Xiang, Wenguo
    ENERGY CONVERSION AND MANAGEMENT, 2018, 167 : 113 - 124
  • [35] Multi-Objective Optimization of a Solar Combined Power Generation and Multi-Cooling System Using CO2 as a Refrigerant
    Hammemi, Rania
    Elakhdar, Mouna
    Tashtoush, Bourhan
    Nehdi, Ezzedine
    ENERGIES, 2023, 16 (04)
  • [36] Design and optimization of CO2 pressurization system integrated with a supercritical CO2 power cycle for the CO2 capture and storage system
    Muhammad, Hafiz Ali
    Lee, Gilbong
    Cho, Junhyun
    Bhatti, Umair Hassan
    Baik, Young-Jin
    Lee, Beomjoon
    ENERGY CONVERSION AND MANAGEMENT, 2019, 195 : 609 - 619
  • [37] Design, Fabrication, and Partial Characterization of a Solar Receiver and Air-Cooled Heat Exchanger for a Concentrated Solar Power Supercritical CO2 Testbed
    Nobles-Lookingbill, Danielle
    Sahm, Aaron
    Hurt, Rick
    Boehm, Robert
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (06):
  • [38] Sensitivity analysis of supercritical CO2 power cycle energy and exergy efficiencies regarding cycle component efficiencies for concentrating solar power
    Novales, D.
    Erkoreka, A.
    De la Pena, V.
    Herrazti, B.
    ENERGY CONVERSION AND MANAGEMENT, 2019, 182 : 430 - 450
  • [39] Genetic algorithm-based optimization of combined supercritical CO2 power and flash-tank enhanced transcritical CO2 refrigeration cycle for shipboard waste heat recuperation
    Nanzeeba, Fairooz
    Baigh, Tajwar A.
    Kabir, Afrida
    Khan, Yasin
    Ehsan, M. Monjurul
    ENERGY REPORTS, 2024, 12 : 1810 - 1835
  • [40] Analysis of a graphite foam-NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar power
    Singh, Dileep
    Zhao, Weihuan
    Yu, Wenhua
    France, David M.
    Kim, Taeil
    SOLAR ENERGY, 2015, 118 : 232 - 242