Effects of cellulose addition on the physicochemical properties, pore structure and iodine adsorption of lignin-based biochar

The effects of different doped cellulose contents (0 similar to 50 wt%) on the physicochemical properties, surface morphology, pore structure and iodine adsorption behavior of a lignin-based biochar were studied, and carbon nanotubes (CNTs) were successfully prepared during the pyrolysis process. The results showed that after the addition of cellulose, more micropores were formed on the surface of biochar, but cellulose inhibited the pyrolysis of the lignin to a certain extent. In particular, biochar with 40 wt% cellulose added exhibited a higher yield and more surface functional groups; additionally, CNTs were successfully prepared with this biochar sample. The iodine adsorption kinetics showed that the pseudo-second order kinetic model provided the best fit to the iodine adsorption data for this biochar. L6-C4 exhibited a higher saturation adsorption capacity of 467.38 mg center dot g(-1) in the equilibrium adsorption experiment. Finally, combined with the Fourier transform infrared (FTIR) results, it was found that the enhanced iodine adsorption performance of L6-C4 was mainly caused by its surface functional groups.