The effect of powder shape on the magnetic anisotropy in NdFeB bonded magnets

被引:1
作者
Qu, Zhongjie [1 ]
Wu, Qiong [1 ]
Zhang, Mengkang [1 ]
Wang, Zhanjia [1 ]
Yue, Ming [1 ]
Liu, Weiqiang [1 ]
机构
[1] Beijing Univ Technol, Fac Mat & Mfg, Key Lab Adv Funct Mat, Minist Educ China, Beijing 100124, Peoples R China
基金
国家重点研发计划;
关键词
MECHANICAL-PROPERTIES; DIE-UPSET; FE; FABRICATION; PROGRESS;
D O I
10.1063/9.0000635
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The advent of NdFeB bonded magnets with freedom of shape design is effective in achieving motor size and weight reductions. In this paper, the NdFeB bonded magnets were produced through calendaring molding, and the effect of powder shape on degree of alignment (DOA) of NdFeB bonded magnets was investigated. The magnetic measurement results demonstrate that platelet-shaped anisotropic Master Quality Authenticated (MQA) powders exhibit a significantly higher DOA compared to sphere-shaped anisotropic HDDR powders. Microstructural analysis reveals the presence of an oriented structure induced by mechanical stress in MQA bonded magnets, resulting in magnetic anisotropy. This observation is consistent with the difference in X-ray diffraction (XRD) patterns between the cross-section and surface of MQA bonded magnets. Conversely, spherical HDDR particles display minimal orientation and maintain a random distribution, resulting in magnetic isotropy. The XRD pattern of the cross-section of HDDR bonded magnets closely resembles that of its surface. In summary, our findings highlight the superior potential of platelet-shaped anisotropic MQA powders for achieving enhancing magnetic properties during the calendaring molding process, in contrast to sphere-shaped anisotropic HDDR powders. This study provides valuable insights into the determinants of mechanical particle orientation during the fabrication of anisotropic NdFeB bonded magnets, with implications for the development of high-performance bonded magnets.
引用
收藏
页数:7
相关论文
共 27 条
  • [1] Progress of research on bonded Nd-Fe-B magnets
    Bai Shu-xin
    Zhang Hong
    Lv Li
    Chen Ke
    Li Shun
    Yang Xiao-ping
    Jia Wen-jun
    Cai Hong-nian
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2006, 13 : 489 - 493
  • [2] Perspective and Prospects for Rare Earth Permanent Magnets
    Coey, J. M. D.
    [J]. ENGINEERING, 2020, 6 (02) : 119 - 131
  • [3] PR-FE AND ND-FE-BASED MATERIALS - A NEW CLASS OF HIGH-PERFORMANCE PERMANENT-MAGNETS
    CROAT, JJ
    HERBST, JF
    LEE, RW
    PINKERTON, FE
    [J]. JOURNAL OF APPLIED PHYSICS, 1984, 55 (06) : 2078 - 2082
  • [4] Development of hard ferrite filled thermoplastic elastomers for the production of permanent magnets
    El Yaagoubi, Mohammed
    Schroedl, Manuel
    Schwegler, Dietmar
    Muenster, Bernhard
    [J]. SENSORS AND ACTUATORS A-PHYSICAL, 2022, 333
  • [5] Additive manufacturing of highly dense anisotropic Nd-Fe-B bonded magnets
    Gandha, Kinjal
    Nlebedim, Ikenna C.
    Kunc, Vlastimil
    Lara-Curzio, Edgar
    Fredette, Robert
    Paranthaman, M. Parans
    [J]. SCRIPTA MATERIALIA, 2020, 183 : 91 - 95
  • [6] Mechanical properties of polyphenylene-sulfide (PPS) bonded NdFe-B permanent magnets
    Garrell, MG
    Ma, BM
    Shih, AJ
    Lara-Curzio, E
    Scattergood, RO
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 359 (1-2): : 375 - 383
  • [7] Recent progress in the development of high-performance bonded magnets using rare earth-Fe compounds
    Horikawa, Takashi
    Yamazaki, Masao
    Matsuura, Masashi
    Sugimoto, Satoshi
    [J]. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2021, 22 (01) : 729 - 747
  • [8] Crystallographic alignment in the recombination stage in d-HDDR process of Nd-Fe-B-Ga-Nb powders
    Horikawa, Takashi
    Matsuura, Masashi
    Sugimoto, Satoshi
    Yamazaki, Masao
    Mishima, Chisato
    [J]. AIP ADVANCES, 2016, 6 (05):
  • [9] Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing
    Li, Ling
    Jones, Kodey
    Sales, Brian
    Pries, Jason L.
    Nlebedim, I. C.
    Jin, Ke
    Bei, Hongbin
    Post, Brian K.
    Kesler, Michael S.
    Rios, Orlando
    Kunc, Vlastimil
    Fredette, Robert
    Ormerod, John
    Williams, Aaron
    Lograsso, Thomas A.
    Paranthaman, M. Parans
    [J]. ADDITIVE MANUFACTURING, 2018, 21 : 495 - 500
  • [10] Additive manufacturing of near-net-shape and challenges
    Li, Ling
    Post, Brian
    Kunc, Vlastimil
    Elliott, Amy M.
    Paranthaman, M. Parans
    [J]. SCRIPTA MATERIALIA, 2017, 135 : 100 - 104