Hydraulic heave in round excavation pits with relief boreholes - calculation approach

The use of relief boreholes to reduce the effect of a vertical upward flow has proven to be a constructive measure to avoid the risk of hydraulic heave in excavation pits in groundwater. The applicable standards and regulations, however, only provide general information on the use of relief boreholes. A concept for the verification against hydraulic heave failure using relief boreholes is missing as well as defined information on the arrangement of the relief boreholes and the influence of the excavation geometry. Therefore, the aim of the research work at the Chair of Geotechnical Engineering of RWTH Aachen University was to develop a concept for the proof against hydraulic heave failure with the arrangement of relief boreholes. The result was a calculation approach that determines the decisive fracture body under consideration of the flow conditions due to the relief boreholes. This fracture body can then be used for the proof against hydraulic heave failure. Based on this, dimensioning diagrams were finally generated for typical excavation pit geometries in dimensionless representation.