Effect of Ce3+on structural, morphological, dc electrical resistivity and magnetic studies of Co nano ferrites

The sol-gel auto-combustion method produced rare earth Ce3+ substituted Cobalt ferrite nanomaterials, CoFe2-xCexO4 (x = 0.0, 0.04, 0.08, and 0.12). An X-ray diffractometer, a Field effect scanning electron microscope, a Fourier transform infrared spectrometer, a DC electrical resistivity, and a vibrating sample magnetometer were used to investigate them. The structural, dc resistivity and magnetic properties were examined using standard techniques. XRD analysis revealed a cubic spinel structure in a single phase without any impurity phase for all the prepared samples. With increasing Ce3+ content, a decrease in crystallite size was observed according to Scherrer's formula. Grain size and surface morphology determined from FESEM analysis were 20 to 30 nm. The samples' cubic spinel ferrite properties may be seen in the FTIR data, which show two distinct absorption bands related to the octahedral site at 400 cm-1 and the tetrahedral site at 600 cm-1. FTIR also confirms the presence of Ce3+ in the crystal structure. As the Ce3+ content increases, the DC resistivity decreases, confirming the mate-rial's semiconducting nature and temperature increase in all the synthesized samples. The magnetic behaviour strongly influences the substitution of Ce3+ ions. The samples' paramagnetic properties are enhanced by satu-ration magnetization. The size of the particles affects their coercivity. For the use of nano cobalt ferrite particles in high-density recording media, the MS and HC can be modified.