Influences of the evolving plastic behavior of sheet metal on V-bending and springback analysis considering different stress states

被引:17
作者
Zhang, Chong [1 ]
Lou, Yanshan [1 ]
机构
[1] Xi An Jiao Tong Univ, Sch Mech Engn, 28 Xianning West Rd, Xian 710049, Shaanxi, Peoples R China
关键词
Yield surface evolution; Tension-compression asymmetry; Plastic potential; V-bending; Neutral layer shift; Springback; YIELD FUNCTION; MECHANICAL-BEHAVIOR; NONASSOCIATED FLOW; ALLOY SHEETS; PRESSURE; CRITERION; EVOLUTION; TRANSFORMATION; ANISOTROPY; FRACTURE;
D O I
10.1016/j.ijplas.2024.103889
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Bending is a common forming process that covers various stress states during sheet metal forming, mainly from uniaxial to plane strain states of both tension and compression depending on the inner or outer sides of the sheet. To model the tension-compression asymmetry (TCA) at different stress states, a five stress states-sensitive (Five-SSS) yield function is proposed. The non -linear effect of stress triaxiality eta on plasticity is considered. Multiple analytical calibration methods are obtained for the Five-SSS function by considering different groups of stress states from equibiaxial compression to equi-biaxial tension. One of the methods considers the uniaxial tension, uniaxial compression, plane strain tension, plane strain compression and equi-biaxial tension, which is used to simulate the V-bending process of an advanced high-strength steel QP1180 and a magnesium alloy AZ31. A modified Lode-dependent anisotropic-asymmetric (LAA) function is adopted as plastic potential to model both the TCA and evolution of r-value. The Five-SSS + modified LAA functions can predict the double shift of neutral layer during V-bending for the two investigated materials due to multiple reverse loading in the neutral layer shift zone. For the springback prediction of V-bending, it is observed that the Five-SSS yield function can highly improve the prediction accuracy compared to other functions because it models the TCA under both uniaxial and plane strain states. In addition, the TCA of unloading modulus should be considered for AZ31 to significantly improve the accuracy of springback prediction.
引用
收藏
页数:32
相关论文
共 58 条
[11]   A new analytical method for determination of the flow curve for high-strength sheet steels using the plane strain compression test [J].
Chermette, Charles ;
Unruh, Klaus ;
Peshekhodov, Ilya ;
Chottin, Jerome ;
Balan, Tudor .
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2020, 13 (02) :269-292
[12]   Large strain flow curve identification for sheet metal [J].
Coppieters, S. ;
Traphoener, H. ;
Stiebert, F. ;
Balan, T. ;
Kuwabara, T. ;
Tekkaya, A. E. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 308
[13]  
DRUCKER DC, 1949, J APPL MECH-T ASME, V16, P349
[14]   An Experimental Methodology to Characterize the Plasticity of Sheet Metals from Uniaxial to Plane Strain Tension [J].
Fast-Irvine, C. ;
Abedini, A. ;
Noder, J. ;
Butcher, C. .
EXPERIMENTAL MECHANICS, 2021, 61 (09) :1381-1404
[15]   Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction [J].
He, Ji ;
Han, Guofeng ;
Feng, Yishuang .
THIN-WALLED STRUCTURES, 2022, 173
[16]   A THEORY OF THE YIELDING AND PLASTIC FLOW OF ANISOTROPIC METALS [J].
HILL, R .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1948, 193 (1033) :281-297
[17]   A new anisotropic-asymmetric yield criterion covering wider stress states in sheet metal forming [J].
Hou, Yong ;
Min, Junying ;
Abd El-Aty, Ali ;
Han, Heung Nam ;
Lee, Myoung Gyu .
INTERNATIONAL JOURNAL OF PLASTICITY, 2023, 166
[18]   Modeling stress anisotropy, strength differential, and anisotropic hardening by coupling quadratic and stress-invariant-based yield functions under non-associated flow rule [J].
Hou, Yong ;
Min, Junying ;
Lin, Jianping ;
Lee, Myoung-Gyu .
MECHANICS OF MATERIALS, 2022, 174
[19]   Evolving asymmetric yield surfaces of quenching and partitioning steels: Characterization and modeling [J].
Hou, Yong ;
Min, Junying ;
Guo, Nan ;
Shen, Yifei ;
Lin, Jianping .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 290
[20]   A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation [J].
Hou, Yong ;
Min, Junying ;
Stoughton, Thomas B. ;
Lin, Jianping ;
Carsley, John E. ;
Carlson, Blair E. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2020, 135