Physical modeling and dynamic characteristics of pumped thermal energy storage system

被引:10
作者
An, Xugang [1 ]
He, Qing [1 ]
Zhang, Qianxu [1 ]
Liu, Ruonan [1 ]
Lu, Chang [1 ]
Du, Dongmei [1 ]
机构
[1] North China Elect Power Univ, Sch Energy Power & Mech Engn, 2 Beinong Rd, Beijing 102206, Peoples R China
关键词
Energy storage; Pumped thermal energy storage; Physical modeling; Dynamic characteristics;
D O I
10.1016/j.energy.2023.130144
中图分类号
O414.1 [热力学];
学科分类号
摘要
Pumped thermal energy storage (PTES) technology offers numerous advantages as a novel form of physical energy storage. However, there needs to be a more dynamic analysis of PTES systems. This paper proposes a dynamic simulation model of the PTES system using a multi-physics domain modeling method to investigate the dynamic response of key system parameters during the system's start-up and variable operating conditions. Additionally, the impact of equipment parameters on system characteristics was analyzed. Furthermore, a comparative analysis was conducted to assess the variation in system characteristics when considering the different working medium properties. The results show that the system cavity volume should be selected as 5 m3, and the initial pressure of the system during the charge/discharge period should be selected as 2.1 MPa and 3.8 MPa, respectively. The system runs to the design operating conditions during the start-up process in about 1400 s. In the process of variable operation conditions, the power load in the charge/discharge period can be increased or reduced from the rated value by gas filling or venting, and the system characteristics change accordingly. The simulation model and research findings will offer theoretical insights for optimizing the design of the PTES system.
引用
收藏
页数:14
相关论文
共 28 条
[1]   Pumped thermal energy storage and bottoming system part A: Concept and model [J].
Abarr, Miles ;
Geels, Brendan ;
Hertzberg, Jean ;
Montoya, Lupita D. .
ENERGY, 2017, 120 :320-331
[2]   Techno-economic assessment for a pumped thermal energy storage integrated with open cycle gas turbine and chemical looping technology [J].
Bahzad, Husain ;
Fennell, Paul ;
Shah, Nilay ;
Hallett, Jason ;
Ali, Naser .
ENERGY CONVERSION AND MANAGEMENT, 2022, 255
[3]   Dynamic economic dispatch incorporating renewable energy sources and pumped hydroenergy storage [J].
Basu, Mousumi .
SOFT COMPUTING, 2020, 24 (07) :4829-4840
[5]  
Chang LU, 2018, Power and Energy, V39, P861
[6]  
Chang Lu, 2022, Proc CSEE, V42, P167
[7]   A thermal energy storage process for large scale electric applications [J].
Desrues, T. ;
Ruer, J. ;
Marty, P. ;
Fourmigue, J. F. .
APPLIED THERMAL ENGINEERING, 2010, 30 (05) :425-432
[8]  
Dixon SL, 2010, FLUID MECHANICS AND THERMODYNAMICS OF TURBOMACHINERY, 6TH EDITION, P1
[9]  
Farres-Antunez P., 2019, Modelling and development of thermo-mechanical energy storage
[10]   The combined value of wind and solar power forecasting improvements and electricity storage [J].
Hodge, Bri-Mathias ;
Martinez-Anido, Carlo Brancucci ;
Wang, Qin ;
Chartan, Erol ;
Florita, Anthony ;
Kiviluoma, Juha .
APPLIED ENERGY, 2018, 214 :1-15