Hybrid Organic/Inorganic Piezoelectric Device for Energy Harvesting and Sensing Applications

Novel hybrid organic/inorganic flexible devices with composite films, consisting of Ba0.5Sr0.5TiO3 (BST), were prepared by inserting BST nanocoating under spray deposited Poly-vinylidene fluoride-based co-polymer PVDF-TrFE. The study validated that the crystalline structure of BST remains unaffected by the presence of polymer. The 3D atomic force microscopic image of the composite sample confirmed the improved surface roughness and contact conditions after spraying the polymer. As a result, the hybrid sample exhibited a higher polarization current with reduced impedance and parasitic inductance. The enhancement of the stability of the piezoelectric parameters at multiple bending was observed for the hybrid sample in comparison with the BST single film transducer. The drop of the root mean square (RMS) voltage was 70% after approximately 340,000 numbers of bending against less than 3% for the hybrid BST+PVDF-TrFE device. Due to the effect of the separate layers and summed net charges, the piezoelectric voltage of the hybrid device was competitive to the piezoelectric oxide films, despite the lower piezoelectric coefficient of the polymer. The proposed solution paves the path toward lead-free, wearable energy harvesting devices for low-power consuming electronic devices.