Influence of Al on microstructural evolution and mechanical behaviour of Nb-9Ti-8C alloys

被引：1
作者：
Wei, Wenqing [1 ,2 ]
Yang, Jinghong [1 ]
Ye, Chaochao [1 ]
Zhang, Shuzhi [1 ]
Zhang, Hao [3 ]
机构：
[1] Weifang Univ, Sch Mech & Automat, Weifang, Peoples R China
[2] Tianjin Univ, Sch Mech Engn, Tianjin, Peoples R China
[3] Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Ningbo, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2023年 / 39卷 / 07期
关键词：
Nb-Ti-Al-C alloy; microstructure; heat treatment; mechanical properties; phase precipitation; NB; ZR; ADDITIONS; HF;
D O I：
10.1080/02670836.2022.2141872
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Nb-9Ti-8C-xAl (at.-%) alloys with Al content of 0, 5%, 10% and 15% were prepared using the vacuum arc-melting method, and microstructural evolution and mechanical behaviour were investigated. Nb-9Ti-8C-(0, 5)Al alloys are composed of body-centred cubic (bcc) Nb solid solution (Nbss), face-centred cubic (fcc) (Nb, Ti)C and close-packed hexagonal Nb2C phases. As Al content increases, besides Nbss and (Nb, Ti)C, Nb3Al phase precipitates. After heat treatment at 1100 degrees C for 24 h, Nb2C phase disappears gradually and massive Nb3Al phase precipitates. Nbss and internal Nb3Al phase exhibit lamellar structure. Al addition favours the enhancement of compressive strength (sigma(0.2) and sigma(max)), Nb3Al precipitation can significantly improve the strength of Nb-9Ti-8C alloy, but reduce its toughness. With test temperature increases, the strength decreases obviously.
引用
收藏
页码：777 / 784
页数：8
相关论文
共 50 条
  • [31] Influence of intermetallic phase (TiFe) on the microstructural evolution and mechanical properties of as-cast and quenched Ti-Mo-Fe alloys
    Moshokoa, Nthabiseng
    Makhatha, Elizabeth
    Raganya, Lerato
    Makoana, Washington
    Chauke, Hasani
    Diale, Ramogohlo
    Phasha, Maje
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [32] Influence of Nb Content of Ti-xNb-7Al Alloys on β→α" Transformation with Tempering
    Ijiri, Masataka
    Tomita, Yuki
    Ishikawa, Takafumi
    Kadowaki, Kenji
    Takemoto, Yoshito
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2017, 81 (07) : 345 - 351
  • [33] Microstructural evolution and hardening behaviour of cast and heat-treated Ru−Al and Ru−Al−Ni alloys
    Anil Borah
    P. S. Robi
    Ajit L. Mujumdar
    A. Srinivasan
    Metals and Materials International, 2008, 14 : 123 - 132
  • [34] Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe-15Al-10Nb alloys
    Yang, Guang
    Milenkovic, Srdjan
    INTERMETALLICS, 2014, 55 : 129 - 137
  • [35] The microstructural characteristics and high temperature mechanical properties of quaternary Ti-V-Al-Co shape memory alloys
    Yi, Xiaoyang
    Wang, Haizhen
    Sun, Bin
    Sun, Kuishan
    Huang, Chaohui
    Gao, Zhiyong
    Meng, Xianglong
    Cai, Wei
    Zhao, Liancheng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 835
  • [36] Effect of Mo addition on the microstructural evolution and mechanical properties of Fe-Ni-Cr-Mn-Al-Ti high entropy alloys
    Ren, C.
    Sun, K.
    Jia, Y. F.
    Zhang, N. Z.
    Jia, Y. D.
    Wang, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 864
  • [37] Phase transformation in Ti-48Al-6Nb porous alloys and its influence on pore properties
    Wang, Fan
    Liang, Yongfeng
    Shang, Shunli
    Liu, Zi-Kui
    Lin, Junpin
    MATERIALS & DESIGN, 2015, 83 : 508 - 513
  • [38] Effect of cyclic DHT on microstructural evolution and mechanical properties of Ti44Al6Nb1Cr2V alloy
    Liu, Yangli
    Zheng, Weiwei
    Fang, Hongze
    Yang, Yaohua
    Chen, Ruirun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 936
  • [39] Influence of boron and oxygen on the microstructure and mechanical properties of high-strength Ti66Nb13Cu8Ni6.8Al6.2 alloys
    Helth, A.
    Siegel, U.
    Kuehn, U.
    Gemming, T.
    Gruner, W.
    Oswald, S.
    Marr, T.
    Freudenberger, J.
    Scharnweber, J.
    Oertel, C. -G.
    Skrotzki, W.
    Schultz, L.
    Eckert, J.
    ACTA MATERIALIA, 2013, 61 (09) : 3324 - 3334
  • [40] Microstructural and mechanical characterization of multiphase Nb-based composites from Nb-Ti-C-B system
    Zhang, Xinjiang
    He, Xiaodong
    Fan, Chenglei
    Li, Yibin
    Song, Guangping
    Sun, Yue
    Huang, Jianping
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 41 : 185 - 190
12345