Fatigue crack characterisation in 2024-T351 aluminium alloy through SEM observation combined with the CJP model

被引：8

作者：

Robles, J. M. ^{[1
]}

Vasco-Olmo, J. M. ^{[2
]}

Cruces, A. S. ^{[1
]}

Diaz, F. A. ^{[2
]}

James, M. N. ^{[3
,4
]}

Lopez-Crespo, P. ^{[1
]}

机构：

[1] Univ Malaga, Dept Civil & Mat Engn, C Dr Ortiz Ramos,s n, Malaga 29071, Spain

[2] Univ Jaen, Dept Ingn Mecan & Min, Esuela Politecn Super Jaen, Jaen, Spain

[3] Univ Plymouth, Sch Engn Comp & Math, Plymouth, England

[4] Nelson Mandela Univ, Dept Mech Engn, Port Elizabeth, South Africa

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2023年 / 166卷

关键词：

Fatigue crack growth; CJP model; Digital Image Correlation; Scanning Electron Microscopy; NUMERICAL-ANALYSIS; CLOSURE; GROWTH; STRESS; BEHAVIOR; PROPAGATION; PLASTICITY; STRENGTH; ZONE;

D O I：

10.1016/j.ijfatigue.2022.107279

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work characterises crack growth in AA2024-T315 by combining different methods to further increase the reliability of the results. The Christopher-James-Patterson (CJP) model was fitted to experimental data obtained by digital image correlation (DIC). The effective value of the CJP stress intensity factors were successfully correlated with the Delta K-da/dN curve as obtained with Scanning Electron Microscopy measurements of the depth of striations on the fracture surface. This approach based on fitting the CJP model with DIC data and SEM ob-servations allowed estimation of opening and closure loads and allowed the propagation rate and fracture mode to be effectively characterised.

引用

页数：10

共 45 条

[31] Vibration fatigue life and fracture analysis of 2024-T351 aluminum alloy treated by cryogenic laser peening
Chen, Hansong
Leng, Xumin
Xu, Yangyang
Meng, Xiankai
APPLIED OPTICS, 2022, 61 (25) : 7307 - 7314
[32] Experimental investigation of fatigue crack initiation from notches in 2024 T351 Al-alloy
Benachour, Nadjia
Benachour, Mustapha
Benguediab, Mohamed
FRATTURA ED INTEGRITA STRUTTURALE, 2020, 14 (51): : 45 - 51
[33] Constant and variable amplitude fatigue testing of aluminum alloy 2024-T351 with ultrasonic and servo-hydraulic equipment
Fitzka, M.
Mayer, H.
INTERNATIONAL JOURNAL OF FATIGUE, 2016, 91 : 363 - 372
[34] Investigation of cold expansion of short edge margin holes with pre-existing cracks in 2024-T351 aluminium alloy
Andrew, D. L.
Clark, P. N.
Hoeppner, D. W.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2014, 37 (04) : 406 - 416
[35] Crystal Plasticity Modeling of Laser Peening Effects on Tensile and High Cycle Fatigue Properties of 2024-T351 Aluminum Alloy
Toursangsaraki, Maziar
Wang, Huamiao
Hu, Yongxiang
Karthik, Dhandapanik
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (07):
[36] The effect of laser shock peening on surface integrity and high and very high cycle fatigue properties of 2024-T351 aluminum alloy
Qin, Zhi
Li, Bin
Huang, Xia
Zhang, Han
Chen, Rui
Adeel, Muhammad
Xue, Hongqian
OPTICS AND LASER TECHNOLOGY, 2022, 149
[37] Microstructure-sensitivity of CPFEM models on fretting fatigue crack initiation of AA2024-T351 alloy
Chen, Qingqing
Xu, Yazhou
Zheng, Xiaoyu
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2024, 222
[38] Effects of scanning path gradient on the residual stress distribution and fatigue life of AA2024-T351 aluminium alloy induced by LSP
Larson, Enoch Asuako
Ren, Xudong
Adu-Gyamfi, Samuel
Zhang, Hongfeng
Ren, Yunpen
RESULTS IN PHYSICS, 2019, 13
[39] Numerical simulation of fatigue crack growth in friction stir welded T joint made of Al 2024 T351 alloy
Kredegh, Abubakr
Sedmak, Aleksandar
Grbovic, Aleksandar
Milosevic, Nenad
Danicic, Darko
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 3065 - 3072
[40] A versatile approach for online measurement of fatigue crack growth in Aluminium alloy AI 2024-T851
School of Mechanical and Building Sciences, VIT University, Vellore, Tamilnadu, India
International Journal of Materials and Structural Integrity, 2008, 1 (04) : 344 - 354

← 1 2 3 4 5 →