Fatigue crack characterisation in 2024-T351 aluminium alloy through SEM observation combined with the CJP model

被引：8

作者：

Robles, J. M. ^{[1
]}

Vasco-Olmo, J. M. ^{[2
]}

Cruces, A. S. ^{[1
]}

Diaz, F. A. ^{[2
]}

James, M. N. ^{[3
,4
]}

Lopez-Crespo, P. ^{[1
]}

机构：

[1] Univ Malaga, Dept Civil & Mat Engn, C Dr Ortiz Ramos,s n, Malaga 29071, Spain

[2] Univ Jaen, Dept Ingn Mecan & Min, Esuela Politecn Super Jaen, Jaen, Spain

[3] Univ Plymouth, Sch Engn Comp & Math, Plymouth, England

[4] Nelson Mandela Univ, Dept Mech Engn, Port Elizabeth, South Africa

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2023年 / 166卷

关键词：

Fatigue crack growth; CJP model; Digital Image Correlation; Scanning Electron Microscopy; NUMERICAL-ANALYSIS; CLOSURE; GROWTH; STRESS; BEHAVIOR; PROPAGATION; PLASTICITY; STRENGTH; ZONE;

D O I：

10.1016/j.ijfatigue.2022.107279

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work characterises crack growth in AA2024-T315 by combining different methods to further increase the reliability of the results. The Christopher-James-Patterson (CJP) model was fitted to experimental data obtained by digital image correlation (DIC). The effective value of the CJP stress intensity factors were successfully correlated with the Delta K-da/dN curve as obtained with Scanning Electron Microscopy measurements of the depth of striations on the fracture surface. This approach based on fitting the CJP model with DIC data and SEM ob-servations allowed estimation of opening and closure loads and allowed the propagation rate and fracture mode to be effectively characterised.

引用

页数：10

共 45 条

[21] Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351
Pec, Michal
Sebek, Frantisek
Zapletal, Josef
Petruska, Jindrich
Hassan, Tasnim
ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (03)
[22] A formula for the crack opening level under random loading in 2024-T351 aluminum alloy
Chung-Youb Kim
Ji-Ho Song
Journal of Mechanical Science and Technology, 2014, 28 : 521 - 525
[23] Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of 2024-T351 Aluminum Alloy
Ni, C. C.
NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 2435 - +
[24] Probabilistic crack growth behavior of aluminum 2024-T351 alloy using the 'unified' approach
Maymon, G
INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (07) : 828 - 834
[25] Prediction of Fatigue Crack Growth of 2024-T351 by Grey GM (1,1) Model with Rolling Check
Ni, C. C.
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 1779 - 1783
[26] An evaluation on high cycle fatigue fracture characteristics of 2024-T351 Al alloy with different surface defects
Liu, A.
Xu, Z. W.
Liang, Z.
Wang, X. S.
MECHANICS OF MATERIALS, 2022, 164
[27] Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects
Fratini, L.
Pasta, S.
Reynolds, A. P.
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (03) : 495 - 500
[28] Development of fatigue cracks from mechanically machined scratches on 2024-T351 aluminium alloyPart II: finite element analysis and prediction method
Cini, A.
Irving, P. E.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (06) : 853 - 868
[29] Study on the influence of shot peening strengthening before shot peen forming on 2024-T351 aluminum alloy fatigue crack growth rate
Li, Guowei
Dong, Zhicheng
Luo, Tianhao
Huang, Heyuan
SCIENTIFIC REPORTS, 2023, 13 (01)
[30] Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
Kraedegh, Abubakr
Sedmak, Aleksandar
Grbovic, Aleksandar
Sedmak, Simon
INTERNATIONAL JOURNAL OF FATIGUE, 2017, 105 : 276 - 282

← 1 2 3 4 5 →