Effect of lignocellulosic biomass components on the extracellular electron transfer of biochar-based microbe-electrode in microbial electrochemical systems

Biomass -derived carbon -based electrodes with good biocompatibility, sustainability, and low cost are competitive in microbial electrochemical systems. Unfortunately, biomass composition is complex, and biochar performance is dependent on the kind of biomass, making quantitative function control difficult. Three-dimensional (3D) lignocellulosic carbon -based electrodes were generated in this study by varying the ratios of three natural biopolymers (cellulose, lignin, and hemicellulose). The biopolymer contents significantly impacted the material's physicochemical and electrochemical properties. Only the proper ratio of these natural polymers can ensure the 3D structure's integrity and mechanical strength after carbonization. The greater the cellulose content and the lower the hemicellulose (xylan) content, the lower the ohmic and charge transfer resistance. The maximum power density (Pmax) of the microbial fuel cells equipped with the biopolymer-based anode ranged between 4.5 and 4.8 W m- 2, setting a new record for biocarbon electrodes. The highest Pmax was observed when the cellulose, lignin, and xylan ratios were 1:3:2 (4.80 +/- 0.04 W m-2). The Pmax correlates with cellulose content more than lignin and xylan and with material capacitance more than with other parameters. High cellulose content facilitates electron transfer but reduces the capacitance of carbon -based electrodes. The material's electron transfer resistance and capacitance contribute to the opposite of the Pmax. So, the interaction with multiple properties influences the electrode performance. This research revealed the effects of natural biopolymer compositions on electrode performance, which was helpful for quantitatively modifying functional carbon -based materials.