3D printing for precision construction of ceramic membranes: Current status, challenges, and prospects

被引：8
|
作者：
Chen, Xianfu [1 ,2 ]
Cao, Qirui [1 ]
Chen, Ting [1 ]
Wang, Dongyu [1 ]
Fan, Yiqun [1 ,2 ]
Xing, Weihong [1 ]
机构：
[1] Nanjing Tech Univ, Coll Chem Engn, State Key Lab Mat Oriented Chem Engn, Nanjing 211816, Peoples R China
[2] Suzhou Lab, Energy & Environm Mat Res Dept, Suzhou 215123, Peoples R China
来源：
ADVANCED MEMBRANES | 2023年 / 3卷
基金：
中国国家自然科学基金;
关键词：
3D-printing; Additive manufacturing; Dense ceramic membranes; Porous ceramic membranes; Precision construction; SOLID OXIDE FUEL; ZIRCONIA; ALUMINA; MICROFILTRATION; FABRICATION; COMPONENTS; SCAFFOLDS; STRENGTH;
D O I：
10.1016/j.advmem.2023.100068
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
3D printing of ceramic materials has gained tremendous attention in recent years due to its high efficiency and competitive prices in the fabrication of advanced ceramics with complex geometric structures. The application of 3D printing for the precision construction of ceramic membranes has demonstrated great promise in enhancing their separation efficiency and expanding their usage scenarios. This review provides an overview of 3D-printed ceramic membranes from different materials and technologies. It covers the research progress of 3D printing for both dense and porous ceramic membranes. Moreover, the challenges of 3D printing technology faced by ceramic membranes are discussed, and potential development directions are prospected.
引用
收藏
页数：18
相关论文
共 50 条
  • [1] 3D Printing in pharmaceutical manufacturing: Current status and future prospects
    Sultana, Niha
    Ali, Asad
    Waheed, Ayesha
    Aqil, Mohd.
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [2] Current Status and Prospects of Polymer Powder 3D Printing Technologies
    Wang, Yue
    Xu, Zhiyao
    Wu, Dingdi
    Bai, Jiaming
    MATERIALS, 2020, 13 (10)
  • [3] 3D printing for ultra-precision machining: current status, opportunities, and future perspectives
    He, Tao
    Yip, Wai Sze
    Yan, Edward Hengzhou
    Tang, Jiuxing
    Rehan, Muhammad
    Teng, Long
    Wong, Chi Ho
    Sun, Linhe
    Zhang, Baolong
    Guo, Feng
    Zhang, Shaohe
    To, Suet
    FRONTIERS OF MECHANICAL ENGINEERING, 2024, 19 (04)
  • [4] Ten challenges in 3D printing
    Oropallo, William
    Piegl, Les A.
    ENGINEERING WITH COMPUTERS, 2016, 32 (01) : 135 - 148
  • [5] 3D printing for remote housing: Benefits and challenges
    Bazli, Milad
    Ashrafi, Hamed
    Rajabipour, Ali
    Kutay, Cat
    AUTOMATION IN CONSTRUCTION, 2023, 148
  • [6] 3D printing of ceramic composite with biomimetic toughening design
    Sun, Jinxing
    Yu, Shixiang
    James, Wade-Zhu
    Wang, Yue
    Qu, Hongqiao
    Zhao, Shuai
    Zhang, Rui
    Yang, Jinglei
    Binner, Jon
    Bai, Jiaming
    ADDITIVE MANUFACTURING, 2022, 58
  • [7] Advancements in Photocurable 3D Printing Technologies for Ceramic Materials
    Cui, Shuyuan
    Lin, Jia
    Wang, Rongwen
    Yang, Yihang
    Huang, Guimei
    Wang, Jinhuo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [8] 3d printing technologies applied for food design: Status and prospects
    Godoi, Fernanda C.
    Prakash, Sangeeta
    Bhandari, Bhesh R.
    JOURNAL OF FOOD ENGINEERING, 2016, 179 : 44 - 54
  • [9] 3D Printing in Construction: Current Status, Implementation Hindrances, and Development Agenda
    Ning, Xin
    Liu, Tong
    Wu, Chunlin
    Wang, Chao
    ADVANCES IN CIVIL ENGINEERING, 2021, 2021
  • [10] 3D printing: a critical review of current development and future prospects
    Ali, Md. Hazrat
    Batai, Shaheidula
    Sarbassov, Dastan
    RAPID PROTOTYPING JOURNAL, 2019, 25 (06) : 1108 - 1126
12345