共 2 条
Theoretical analysis of AC current supply of doubly salient permanent magnet machine with quasi sinusoidal back-EMF and inductance variations
被引:0
作者:
Chen, Hao
[1
]
Liu, Luming
[1
]
Ait-Ahmed, Nadia
[2
]
Wang, Yide
[3
]
Charpentier, Jean-Frederic
[4
]
Zaim, Mohamed EI-Hadi
[2
]
Machmoum, Mohamed
[2
]
Benbouzid, Mohamed
[1
,5
]
机构:
[1] Shanghai Maritime Univ, Res Inst Power Drive & Control, Shanghai 201306, Peoples R China
[2] Univ Nantes, Inst Rech Energie Elect Nantes Atlantique, F-44602 St Nazaire, France
[3] Univ Nantes, IETR, F-44602 St Nazaire, France
[4] French Naval Acad, Inst Rech Ecole Navale EA 3634 IRENav, F-29240 Brest, France
[5] Univ Brest, UMR CNRS IRDL 6027, F-29240 Brest, France
基金:
中国国家自然科学基金;
关键词:
Doubly salient permanent magnet machine;
Current waveforms;
Rotating stationary frame;
Model;
Mathematical analysis;
TORQUE RIPPLE MINIMIZATION;
D O I:
10.1007/s00202-023-02142-5
中图分类号:
TM [电工技术];
TN [电子技术、通信技术];
学科分类号:
0808 ;
0809 ;
摘要:
Doubly salient permanent magnet machine (DSPMM), which is a branch of stator-Permanent Magnet (PM) machine, is becoming more and more attractive due to higher power density and fault-tolerant capability, better mechanical robustness, simpler rotor configuration, lower PM consumption and higher PM material utilization efficiency. Thus, it has great application potential in the fields of transportation electrification and renewable energy generation. However, due to the special doubly salient structure, PM flux-linkage and inductance have the same variation period, which would complicate the relationship between the current and torque, and bring difficulties in the modeling and control (even after Park's transformation). In order to solve these problems, this paper will develop, analyze and compare the different current waveforms which could theoretically reduce the torque ripple and the transformations which could decouple the model in the rotating stationary frame for a simplified DSPMM model neglecting the higher harmonics. Based on the mathematical analysis, this paper would provide a clear relationship between the current waveforms and the torque with the DSPMM parameters, and the possible transformation which could simplify the model and be used in the control system.
引用
收藏
页码:3771 / 3792
页数:22
相关论文