An active disturbance rejection synchronous control strategy based on cross compensation for stepper motor XY platform

被引:4
作者
Chen, Guangda [1 ]
Xue, Ruonan [1 ]
Song, Chao [1 ]
Liu, Dejun [2 ]
Ren, Letian [1 ]
Cheng, Yanming [1 ]
机构
[1] Beihua Univ, Coll Elect & Informat Engn, Jilin, Jilin, Peoples R China
[2] Beihua Univ, Engn Training Ctr, 1 Xinshan St, Longtan Dist 132021, Jilin, Peoples R China
基金
芬兰科学院;
关键词
XY platform; bilateral drive; ADRC; deviation self-coupling compensator (DSCC); synchronization;
D O I
10.1177/00202940221107675
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In view of the system uncertainty factors and bilateral drive synchronization problems of XY platform driven by stepping motor, on the basis of the mathematical model of single axis servo system, in order to improve traceability and disturbance rejection in X,Y direction, a double loop structure with PID controller as speed loop and active disturbance rejection as position loop is proposed to solve the contradiction between rapidity and overshoot, moreover, an ESO performance analysis method is proposed, and the parameter tuning rules of ADRC is summarized. On this basis, a deviation self-coupling compensation control strategy is proposed to solve the problem of bilateral drive synchronization in axis X direction, and the mechanism and parameter adjusting method of the compensator are studied. The comparative experiment between ADRC+PID+deviation self-coupling compensation and PID+PID+deviation self-coupling compensation, the comparative experiment between ADRC+PID+deviation self-coupling compensation and ADRC+PID are conducted, respectively. Finally, the experiment of synthetic trajectory of X and Y is carried out, the simulation and experimental results demonstrate that the response time of the control strategy proposed in this paper is 0.5 s, which is 0.2 s faster than PID's, and the disturbance recovery time is 50% of PID control. Therefore, the proposed ADRC+PID+deviation self-coupling compensation control strategy can not only effectively improve the tracking performance of the XY platform system, but also enhance the robustness of the system.
引用
收藏
页码:694 / 703
页数:10
相关论文
共 26 条
[1]  
Chen Jing, 2008, Journal of System Simulation, V20, P3212
[2]   Position synchronization tracking of multi-axis drive system using hierarchical sliding mode control [J].
Dai, Kaiyu ;
Zhu, Zhencai ;
Tang, Yu ;
Shen, Gang ;
Li, Xiang ;
Sa, Yunjie .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (04)
[3]   High-precision motion control method for permanent magnet linear synchronous motor [J].
Fu, Dongxue ;
Zhao, Ximei ;
Yuan, Hao .
IEICE ELECTRONICS EXPRESS, 2021, 18 (09)
[4]   On the foundation of active disturbance rejection control [J].
Gao, Z.-Q. (z.gao@ieee.org), 1600, South China University of Technology (30)
[5]  
Han J., 1995, Control Decis, V10, P221
[6]   From PID to Active Disturbance Rejection Control [J].
Han, Jingqing .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2009, 56 (03) :900-906
[7]  
Huang F., 2010, MICRO MOTOR, P94
[8]  
Jiefan, 2016, MICROMOTORS, V49, P54
[9]  
[金鸿雁 Jin Hongyan], 2019, [电机与控制学报, Electric Machines and Control], V23, P42
[10]  
[金鸿雁 Jin Hongyan], 2018, [电工技术学报, Transactions of China Electrotechnical Society], V33, P4971