Experimental analysis of the sweepback angle effect on the thrust generation of a robotic penguin wing

被引:4
|
作者
Shen, Yayi [1 ]
Tanaka, Hiroto [2 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing, Peoples R China
[2] Tokyo Inst Technol, Dept Mech Engn, Tokyo, Japan
基金
日本学术振兴会;
关键词
sweepback angle; penguin wing; robotic penguin; thrust generation; aquatic locomotion; DESIGN;
D O I
10.1088/1748-3190/acb521
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Penguins have evolved excellent swimming skills as diving birds, benefiting from their agile wings. This paper experimentally analyzes the effects of the wing sweepback angle on thrust generation using a robotic penguin wing. A developed wing mechanism that can realize penguin-like flapping and feathering motion was used for actuating five alternative wing models, with different sweepback angles ranging from 0 degrees to 50 degrees. Force measurements under a steady water flow were conducted for both fixed and flapping states for all wing models. The results showed that small sweepback angles of 30 degrees or less in the fixed state caused a steep lift curve and a moderate sweepback angle of 30 degrees produced the largest lift-to-drag ratio. In the flapping state, the smaller sweepback wings generated a larger net thrust for the same wing motion, whereas the larger-sweepback wings produced more thrust under the same Strouhal number. The findings also revealed that larger sweepback wings more easily achieve the maximum net thrust in terms of less angle-of-attack control. In contrast, the hydrodynamic efficiency was not greatly affected by the sweepback. Regardless of the sweepback, the trend of the efficiency increasing with increasing flow speed indicates that the penguin wings can be more suitable for high-speed locomotion for higher hydrodynamic efficiency.
引用
收藏
页数:15
相关论文
共 46 条
  • [31] EFFECT OF COOLANT INJECTION ANGLE ON NOZZLE ENDWALL FILM COOLING: EXPERIMENTAL AND NUMERICAL ANALYSIS IN LINEAR CASCADE
    El-Gabry, Lamyaa
    Xu, Hongzhou
    Liu, Kevin
    Chang, James
    Fox, Michael
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5C, 2018, : 357 - 367
  • [32] Effect of design and operating parameters on power generation in reverse electrodialysis (RED): experimental analysis and modeling
    Ju, Jaehyun
    Choi, Yongjun
    Lee, Sangho
    Kim, Hanki
    Jung, Namjo
    DESALINATION AND WATER TREATMENT, 2020, 191 : 29 - 39
  • [33] Theoretical and experimental analysis of the effect of error motions on surface generation in fast tool servo machining
    Kong, L. B.
    Cheung, C. F.
    Kwok, T. C.
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2014, 38 (02): : 428 - 438
  • [34] The effect of stifle angle on cranial tibial translation following tibial plateau leveling osteotomy: An in vitro experimental analysis
    Johnson, Kelly
    Lanz, Otto
    Elder, Steven
    McLaughlin, Ron
    Werre, Stephen
    Harper, Tisha
    CANADIAN VETERINARY JOURNAL-REVUE VETERINAIRE CANADIENNE, 2011, 52 (09): : 961 - 966
  • [35] Experimental analysis of four-wave mixing effect on next generation Ethernet passive optical network
    Xu, Yan
    Yu, Peihua
    Ye, Nan
    Song, Yingxiong
    OPTICAL ENGINEERING, 2020, 59 (07)
  • [36] Effect of substrate wettability in liquid dielectrophoresis (LDEP) based droplet generation: Theoretical analysis and experimental confirmation
    Daunay, B.
    Lambert, P.
    Jalabert, L.
    Kumemura, M.
    Renaudot, R.
    Agache, V.
    Fujita, H.
    LAB ON A CHIP, 2012, 12 (02) : 361 - 368
  • [37] THE EFFECT OF SOLID ANGLE ON THE REPRODUCIBILITY OF AN EXPERIMENTAL SET-UP IN PROMPT GAMMA-RAY NEUTRON-ACTIVATION ANALYSIS
    NICOLAOU, GE
    KHRBISH, YS
    SPYROU, NM
    APPLIED RADIATION AND ISOTOPES, 1986, 37 (12) : 1219 - 1224
  • [38] FE Simulations and Experimental Analysis of the Blade Angle Effect on Sheared Surface in Trimming Process of Advanced High-Strength Steel Sheet
    L. Komgrit
    L. Pongsakorn
    Arabian Journal for Science and Engineering, 2019, 44 : 7909 - 7918
  • [39] Numerical and experimental analysis of particle fracture during solid particle erosion, Part II: Effect of incident angle, velocity and abrasive size
    Hadavi, Vahid
    Moreno, Carlos E.
    Papini, Marcello
    WEAR, 2016, 356-357 : 146 - 157
  • [40] Experimental and finite element modelling analysis on the embedment performance and failure mechanisms of flattened-bamboo composite with the effect of fiber orientation angle
    Yang, Dong
    Li, Haitao
    Wu, Yiqiang
    Hong, Chaokun
    Lorenzo, Rodolfo
    Yuan, Conggan
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 445