Effect of Co on the corrosion resistance and erosion-corrosion behavior of duplex stainless steel surfacing layer

被引：1

作者：

Bao, Yefeng ^{[1
]}

Wei, Shangzhi ^{[1
]}

Liu, Yu ^{[1
]}

Jiang, Yongfeng ^{[1
]}

Yang, Ke ^{[1
]}

Song, Qining ^{[1
]}

机构：

[1] Hohai Univ, Coll Mech & Elect Engn, Changzhou 213002, Jiangsu, Peoples R China

来源：

WELDING IN THE WORLD | 2024年 / 68卷 / 11期

基金：

中国国家自然科学基金;

关键词：

Duplex stainless steel; Erosion-corrosion; TIG welding surfacing; Co content; CARBON-STEEL; MARINE;

D O I：

10.1007/s40194-023-01619-y

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the present work, CrNiMoCo duplex stainless steel (DSS) surfacing layers with Co content of 0, 1, 2, and 3% were prepared on AISI 316L substrate by TIG welding powder surfacing. The DSS was tested in the flowing water with sand particles using jet impingement equipment. The effect of Co on the microstructure and erosion-corrosion behavior of DSS was studied via microstructure observation, hardness test, and electrochemical polarization. The results showed that with the increase of Co content, the proportion of austenite phase increases from 52 to 61% and then decreases to 41%, and the morphology of austenite phase changes from strip-like or island-like to grid-like. The addition of Co worsened the corrosion resistance of CrNiMoCo DSS surfacing layer. Co element was dissolved in the matrix to form solid solution strengthening, which increase the hardness of the material. The excellent resistance to erosion-corrosion was related to the excellent mechanical properties that were adjusted by the Co content.

引用

页码：2985 / 2994

页数：10

共 25 条

[1] Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel
Burstein, GT
Sasaki, K
[J]. WEAR, 2000, 240 (1-2) : 80 - 94
[2] Corrosion mechanisms of steel concrete moulds in contact with a demoulding agent studied by EIS and XPS
Carnot, A
Frateur, I
Zanna, S
Tribollet, B
Dubois-Brugger, I
Marcus, P
[J]. CORROSION SCIENCE, 2003, 45 (11) : 2513 - 2524
[3] Erosion-corrosion behaviour of steels used in slurry pipelines
Chung, R. J.
Jiang, J.
Pang, C.
Yu, B.
Eadie, R.
Li, D. Y.
[J]. WEAR, 2021, 477
[4] X-Ray tomographic characterisation of pitting corrosion in lean duplex stainless steel
Eguchi, Kenichiro
Burnett, Timothy L.
Engelberg, Dirk L.
[J]. CORROSION SCIENCE, 2020, 165
[5] Effect of alloying elements on the electronic properties of thin passive films formed on carbon steel, ferritic and austenitic stainless steels in a highly concentrated LiBr solution
Fernandez-Domene, R. M.
Blasco-Tamarit, E.
Garcia-Garcia, D. M.
Garcia-Anton, J.
[J]. THIN SOLID FILMS, 2014, 558 : 252 - 258
[6] [郭铁明 Guo Tieming], 2013, [材料热处理学报, Transactions of Materials and Heat Treatment], V34, P125
[7] [郭铁明 Guo Tieming], 2011, [机械工程材料, Materials for Mechanical Engineering], V35, P12
[8] Hajime N., 2023, MATER TRANS, V64, P227, DOI [10.2320/matertrans.MT-P2022003, DOI 10.2320/MATERTRANS.MT-P2022003]
[9] Development of synergy model for erosion-corrosion of carbon steel in a slurry pot
Harvey, T. J.
Wharton, J. A.
Wood, R. J. K.
[J]. TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2007, 1 (01) : 33 - 47
[10] Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles
Hussain, E. A. M.
Robinson, M. J.
[J]. CORROSION SCIENCE, 2007, 49 (04) : 1737 - 1754

← 1 2 3 →