Fatigue behaviour of notched steel beams strengthened by a self-prestressing SMA/CFRP composite

被引：29
作者：
Deng, Jun [1 ]
Fei, Zhongyu [1 ]
Li, Junhui [1 ]
Li, Hang [2 ]
机构：
[1] Guangzhou Univ, Sch Civil Engn, Guangzhou 510006, Peoples R China
[2] Guangdong Univ Technol, Sch Civil & Transportat Engn, Guangzhou 510006, Peoples R China
来源：
ENGINEERING STRUCTURES | 2023年 / 274卷
关键词：
Notched steel beam; Shape memory alloy; Carbon fibre -reinforced polymer; Fatigue behaviour; Composite strengthening; SHAPE-MEMORY ALLOY; METALLIC BEAMS; CRACK GROWTH; CFRP PLATE; SYSTEM;
D O I：
10.1016/j.engstruct.2022.115077
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Integrating a NiTiNb-based shape memory alloy (SMA) and carbon fibre-reinforced polymer (CFRP) sheet can achieve a self-stressing SMA/CFRP composite, providing an alternative active (or prestressing) strengthening technology for steel elements. In this study, the effects of retrofitting methods and fatigue load amplitudes on the fatigue behaviour of notched steel beams were experimentally investigated. The retrofitting methods included SMA patch bonding, CFRP sheet bonding, and SMA/CFRP composite bonding. Test results showed that, compared with strengthening methods of CFRP sheets or SMA patches, SMA/CFRP composite strengthening can greatly increase the fatigue lives and slow down the fatigue crack growth rate of steel beam web cracks and interfacial debonding. Besides, the strengthening effect of the SMA/CFRP composite becomes increasingly significant on notched steel beams as the fatigue load amplitude decreases. Additionally, the fatigue life of the SMA/ CFRP composite repaired beams was greater than that of the sum of the fatigue life of repaired beams with SMA or CFRP alone. Moreover, SMA/CFRP composite strengthening can effectively reduce the stiffness degradation rate compared with the other two strengthening methods.
引用
收藏
页数：11
相关论文
共 47 条
  • [1] Fatigue life improvement of steel structures using self-prestressing CFRP/SMA hybrid composite patches
    Abdy, Abduljabbar I.
    Hashemi, M. Javad
    Al-Mahaidi, Riadh
    [J]. ENGINEERING STRUCTURES, 2018, 174 : 358 - 372
  • [2] The effect of pre-strain and number of SMA wires on the compression properties of glass-epoxy conical grid composites
    Alikhani, Amirhossein
    Basaeri, Ali
    [J]. COMPOSITE STRUCTURES, 2021, 262
  • [3] Comparison between shape memory alloy seismic restrainers and other bridge retrofit devices
    Andrawes, Bassem
    DesRoches, Reginald
    [J]. JOURNAL OF BRIDGE ENGINEERING, 2007, 12 (06) : 700 - 709
  • [4] [Anonymous], GBT33541999
  • [5] [Anonymous], GBT25671995
  • [6] [Anonymous], GBT29751998
  • [7] Shape memory alloys (SMAs) for resilient bridges: A state-of-the-art review
    Billah, Ahm Muntasir
    Rahman, Jesika
    Zhang, Qi
    [J]. STRUCTURES, 2022, 37 : 514 - 527
  • [8] Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading
    Bocciarelli, Massimiliano
    Colombi, Pierluigi
    D'Antino, Tommaso
    Fava, Giulia
    [J]. ENGINEERING STRUCTURES, 2018, 171 : 883 - 893
  • [9] Fatigue crack growth in steel beams strengthened by CFRP strips
    Colombi, Pierluigi
    Fava, Giulia
    [J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 85 : 173 - 182
  • [10] Experimental study on the fatigue behaviour of cracked steel beams repaired with CFRP plates
    Colombi, Pierluigi
    Fava, Giulia
    [J]. ENGINEERING FRACTURE MECHANICS, 2015, 145 : 128 - 142
12345