Mechanical investigation of compositing by resin filling in lattice structures manufactured with fused deposition modelling

被引:1
|
作者
Kayacan, Mevlut Yunus [1 ,2 ]
机构
[1] Isparta Univ Appl Sci, Mech Engn, Isparta, Turkiye
[2] Isparta Univ Appl Sci, Mech Engn, Teknol Fak, E-14, TR-32200 Isparta, Turkiye
关键词
Additive manufacturing; composite structures; fused deposition modeling; lattice structure; polymer composite; DESIGN; INFILL;
D O I
10.1177/07316844241243149
中图分类号
TB33 [复合材料];
学科分类号
摘要
Fused Deposition Modeling (FDM) is a widely used polymer additive manufacturing technique for polymer part manufacturing and prototyping. However, manufacturing speed, mechanical properties, and high costs, limit its suitability for industrial applications. In this study, researchers blended polyester and polyurethane resins with lattice structures to achieve a remarkable 70% reduction in production time and a 75% decrease in manufacturing costs. They explored five lattice structure geometries relevant to common literature applications. Lattice structures were manufactured using PA, PLA, PA-CF, and TPU filaments. The composite samples underwent comprehensive analysis, including SEM microscopic inspections, density measurements, and compression tests. Parameters such as density, yield strength, compressive strength, specific stress, modulus of elasticity, and toughness were evaluated. The findings revealed that polyester-based composites exhibited a remarkable 131% enhancement in mechanical properties, with toughness values increasing up to 12-fold. The results revealed significant mechanical advantages that the developed composites can offer in applications.
引用
收藏
页码:961 / 979
页数:19
相关论文
共 50 条
  • [1] The compressive behaviour of ABS gyroid lattice structures manufactured by fused deposition modelling
    Maconachie, Tobias
    Tino, Rance
    Lozanovski, Bill
    Watson, Marcus
    Jones, Alistair
    Pandelidi, Chrysoula
    Alghamdi, Ahmad
    Almalki, Abduladheem
    Downing, David
    Brandt, Milan
    Leary, Martin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 107 (11-12): : 4449 - 4467
  • [2] The compressive behaviour of ABS gyroid lattice structures manufactured by fused deposition modelling
    Tobias Maconachie
    Rance Tino
    Bill Lozanovski
    Marcus Watson
    Alistair Jones
    Chrysoula Pandelidi
    Ahmad Alghamdi
    Abduladheem Almalki
    David Downing
    Milan Brandt
    Martin Leary
    The International Journal of Advanced Manufacturing Technology, 2020, 107 : 4449 - 4467
  • [3] Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling
    Ravari, M. R. Karamooz
    Kadkhodaei, M.
    Badrossamay, M.
    Rezaei, R.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 88 : 154 - 161
  • [4] Printing and characterisation of Kagome lattice structures by fused deposition modelling
    Gautam, Rinoj
    Idapalapati, Sridhar
    Feih, Stefanie
    MATERIALS & DESIGN, 2018, 137 : 266 - 275
  • [5] On the Mechanical Behaviour of Biosourced Cellular Polymer Manufactured Using Fused Deposition Modelling
    Guessasma, Sofiane
    Belhabib, Sofiane
    Bassir, David
    Nouri, Hedi
    Gomes, Samuel
    POLYMERS, 2020, 12 (11) : 1 - 15
  • [6] Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures
    Ang, Ker Chin
    Leong, Kah Fai
    Chua, Chee Kai
    Chandrasekaran, Margam
    RAPID PROTOTYPING JOURNAL, 2006, 12 (02) : 100 - 105
  • [7] Effects of a new filling technique on the mechanical properties of ABS specimens manufactured by fused deposition modeling
    Hussam, Heba
    Abdelrhman, Yasser
    Soliman, M-Emad S.
    Hassab-Allah, Ibrahim M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (3-4): : 1639 - 1650
  • [8] Effects of a new filling technique on the mechanical properties of ABS specimens manufactured by fused deposition modeling
    Heba Hussam
    Yasser Abdelrhman
    M.-Emad S. Soliman
    Ibrahim M. Hassab-Allah
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 1639 - 1650
  • [9] Investigation on the static and dynamic behavior of BCC lattice structure with quatrefoil node manufactured using fused deposition modelling additive manufacturing
    Azmi, M. S.
    Ismail, R.
    Hasan, R.
    5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH 2019 (ICMER 2019), 2020, 788
  • [10] Experimental investigation of mechanical properties and energy absorption capabilities of hybrid lattice structures manufactured using fused filament fabrication
    Syrlybayev, Daniyar
    Perveen, Asma
    Talamona, Didier
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (5-6): : 2833 - 2850