Influence of intercritical annealing temperature on microstructure, microtexture, and tensile behavior of TRIP-assisted medium manganese steel

The present work investigates, the effect of intercritical annealing temperature on the microstructure, micro -texture, tensile behavior, and mechanical stability of austenite in thermomechanically processed Fe-0.18C-4Al-7Mn (wt.%) medium manganese steel. The steel is subjected to thermomechanical processing (hot forging and hot rolling) followed by intercritical annealing at various temperatures (700, 750 and 800 degrees C) for 1 hour. The development of a complex microstructure with blocky and lath-type reverted austenite (RA), fine polygonal and blocky type intercritical ferrite (IF), coarse elongated ferrite (EF), and lath martensite (M) is revealed by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The steel annealed at 750 degrees C exhibits an excellent ultimate tensile strength (UTS) of 802 MPa and total elongation (TE) of 61% owing to its high RA content, high transformation-induced plasticity (TRIP) effect and low mechanical stability of RA. Further, to understand the dislocation phenomena during tensile deformation, the tensile samples are analyzed using TEM, which reveals dislocation interactions, dislocation tangles, and dislocation accumulations at the IF grain boundaries and martensite lath boundaries. The manifestation of the TRIP effect is elucidated by XRD and EBSD studies. In addition, to study the texture evolution and the role of texture components on the TRIP effect, the orientation distribution function is employed. The major texture component, i.e., Ms Brass {011} (211) in-dicates the TRIP effect resulting in the deformation-induced martensitic transformation under tensile deforma-tion. Additionally, Ms Brass component shifts towards G/B (Goss/Brass) twin {011} (111) component by grain rotation to accommodate the deformation.