Experimental investigation on flow boiling heat transfer characteristics of water and circumferential wall temperature inhomogeneity in a helically coiled tube

被引:9
作者
Chang, Fucheng [1 ]
Liu, Yeming [1 ]
Lou, Jiacheng [1 ]
Shang, Yuhao [1 ]
Hu, He [1 ]
Li, Huixiong [1 ]
机构
[1] Xi An Jiao Tong Univ, Sch Energy & Power Engn, State Key Lab Multiphase Flow Power Engn, Xian 710049, Peoples R China
基金
中国国家自然科学基金;
关键词
Helically coiled tube; Flow boiling heat transfer; Circumferential wall temperature inhomogeneity; Flow pattern transition; Heat transfer correlation; STEAM-GENERATOR; PRESSURE-DROP; 2-PHASE FLOW; R134A; CO2;
D O I
10.1016/j.ces.2023.118592
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Helically coiled tubes (HCTs) have been widely used in chemical industry and nuclear engineering because of its compact structure and excellent heat transfer performance. This paper designed and built an experimental platform to study the flow boiling heat transfer (FBHT) of subcritical water with high temperature and high pressure in an HCT. The results showed that the wall temperature on the inner side is higher and it gradually decreases when moving to the outer side along the circumferential direction. The variation law of circumferential wall temperature inhomogeneity (CWTI) under different pressures, mass velocities, heat fluxes and vapour qualities was obtained. The distribution of circumferential wall temperature varies greatly in the single-phase region while it varies slightly and is relatively uniform in the two-phase boiling region. As the vapour quality increases, the CWTI decreases first, and maintains at a low value when the vapour quality is about 0.0 ti 0.9. When the vapour quality reaches about 0.9, the CWTI increases rapidly. When the vapour quality is less than 0.5, the heat flux and mass velocity have little effect on the CWTI. When the vapour quality is larger than 0.5, reducing the heat flux or increasing the mass velocity can effectively reduce the CWTI. In addition, the flow pattern of two-phase boiling flow in the HCT is divided into four regions, namely bubble flow, slug flow, annular flow and mist flow, and the transition vapour quality xt1 = 0.2, xt2 = 0.5 and xt3 = 0.93 are respectively selected according to the sud-den abrupt change of the wall temperature or the differential pressure. Finally, the existing FBHT corre-lations are collected and evaluated and the calculation accuracy needs to be improved for more accurate calculation. Therefore, a new FBHT correlation with better accuracy is proposed for calculating the heat transfer coefficient of two-phase flow boiling in the HCT.(c) 2023 Elsevier Ltd. All rights reserved.
引用
收藏
页数:14
相关论文
共 46 条
  • [1] A case study in the field of sustainability energy: Transient heat transfer analysis of an ice thermal storage system with boiling heat transfer process for air-conditioning application
    Abu-Hamdeh, Nidal H. H.
    Salilih, Elias M. M.
    [J]. ENERGY REPORTS, 2022, 8 : 1034 - 1045
  • [2] Experimental Investigation on Flow Boiling Heat Transfer and Pressure Drop of HFC-134a inside a Vertical Helically Coiled Tube
    Aria, Hatef
    Akhavan-Behabadi, Mohammad A.
    Shemirani, Farzin M.
    [J]. HEAT TRANSFER ENGINEERING, 2012, 33 (02) : 79 - 87
  • [3] A composite heat transfer correlation for saturated flow boiling in small channels
    Bertsch, Stefan S.
    Groll, Eckhard A.
    Garimella, Suresh V.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (7-8) : 2110 - 2118
  • [4] Experimental and numerical study on the heat transfer characteristic of supercritical water with high mass velocity in a helically coiled tube
    Chang, Fucheng
    Hu, He
    Shang, Yuhao
    Hu, Yongpeng
    Li, Xi
    Lei, Hailin
    Li, Huixiong
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 197
  • [5] Dry-out CHF correlation for R134a flow boiling in a horizontal helically-coiled tube
    Chen, C. N.
    Han, J. T.
    Jen, T. C.
    Shao, L.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (1-3) : 739 - 745
  • [6] CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW
    CHEN, JC
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY PROCESS DESIGN AND DEVELOPMENT, 1966, 5 (03): : 322 - &
  • [7] Chisholm D., 1983, Two-phase flow in pipelines and heat exchangers
  • [8] Cui WZ, 2005, HEAT TRANSF DIV ASME, V376-2, P371
  • [9] A heat transfer correlation of flow boiling in micro-finned helically coiled tube
    Cui, Wenzhi
    Li, Longjian
    Xin, Mingdao
    Jen, Tien-Chien
    Chen, Qinghua
    Liao, Quan
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (17-18) : 2851 - 2858
  • [10] A molecular dynamics investigation of boiling heat transfer over wettability thermo-responsive surface
    Deng, Wei
    Ma, Shihua
    Li, Weimin
    Liu, Huaqiang
    Zhao, Jiyun
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 191