Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites

被引：14
|
作者：
Lin, Fei [1 ]
Ren, Mengyuan [1 ]
Wu, Hui [1 ]
Jia, Fanghui [1 ]
Lu, Yao [1 ]
Huo, Mingshuai [1 ]
Yang, Ming [2 ]
Chen, Zhixin [1 ]
Jiang, Zhengyi [1 ]
机构：
[1] Univ Wollongong, Sch Mech Mat Mechatron & Biomed Engn, Wollongong, NSW 2522, Australia
[2] Tokyo Metropolitan Univ, Grad Sch Syst Design, Hino, Tokyo 1910065, Japan
来源：
TRIBOLOGY INTERNATIONAL | 2023年 / 177卷
基金：
澳大利亚研究理事会;
关键词：
Al matrix composites; Titanium carbide; Graphene; Pin-on-disc wear test; SLIDING WEAR BEHAVIOR; TIC NANOPARTICLES; PARTICLE-SIZE; GRAPHENE; ALLOY;
D O I：
10.1016/j.triboint.2022.108018
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Al-10.0 vol% (TiC and GNPs) composites were fabricated with different volume ratios of TiC and GNPs from 10.0:0.0-8.0:2.0 by powder metallurgy. The results show particle free zones (PFZs) in as-sintered composites decrease and distributions of reinforcements become more uniform, and the hardness and wear resistance of hybrid composite increase as TiC-to-GNPs ratio decreases. Al-8.5 vol% TiC-1.5 vol% GNPs has the highest hardness at 200.5 HV and the best wear resistance with a wear rate of 4.99 x 10-4 mm3/Nm based on the collaborative effects of TiC and GNPs, respectively. However, as the GNPs fraction increases to 2.0 vol%, the hardness and wear resistance of the composite drop drastically because of GNPs agglomeration.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of graphene nanoplates reinforced pure Al matrix composites prepared by pressure infiltration method
    Yang, Wenshu
    Zhao, Qiqi
    Xin, Ling
    Qiao, Jing
    Zou, Junyu
    Shao, Puzhen
    Yu, Zhenhe
    Zhang, Qiang
    Wu, Gaohui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 732 : 748 - 758
  • [22] Electromagnetic Preparation and Wear Behavior of In Situ Si-Reinforced Al-Matrix Gradient Self-Lubricating Composites
    Dong, Zonghui
    Zou, Qingchuan
    Kong, Fanshuo
    Xu, Changyuan
    Yu, Xin
    Wu, Da
    An, Xizhong
    ADVANCED ENGINEERING MATERIALS, 2023,
  • [23] Manufacturing and Tribological Behavior of Self-Lubricating Duplex Composites: Graphite-Reinforced Polymer Composites and Polymer-Infiltrated Metal Networks
    Zhang, Yinyin
    Chern, David
    Schulz, Robert
    Mauzeroll, Janine
    Chromik, Richard R.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (01) : 103 - 115
  • [24] Electromagnetic Preparation and Wear Behavior of In Situ Si-Reinforced Al-Matrix Gradient Self-Lubricating Composites
    Dong, Zonghui
    Zou, Qingchuan
    Kong, Fanshuo
    Xu, Changyuan
    Yu, Xin
    Wu, Da
    An, Xizhong
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (21)
  • [25] Effect of Quenching Medium on Sliding Tribology of Self-Lubricating Al-Cu Metal Matrix Composites
    Kumar, Parshant
    Srivastava, Vijay Kumar
    TRIBOLOGY ONLINE, 2020, 15 (03): : 142 - 149
  • [26] Differences in tribological performance between spark plasma sintering and laser melting deposition for fabrication of Ni3Al matrix self-lubricating composites
    Liu, Yubin
    Yan, Zhao
    Shi, Xiaoliang
    Huang, Yuchun
    Xue, Bing
    Ibrahim, Ahmed Mohamed Mahmoud
    MATERIALS RESEARCH EXPRESS, 2018, 5 (07):
  • [27] Investigation of microstructure, mechanical, and tribological properties of solid self-lubricating copper hybrid composites processed by solid-state mixing technique
    Sundararajan, S.
    Rajadurai, J. Selwin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2016, 230 (01) : 40 - 56
  • [28] Effect of elastic and plastic deformations on tribological behavior of graphene-reinforced Ni3Al matrix composites
    Huang, Yuchun
    Shi, Xiaoliang
    Yang, Kang
    Zou, Jialiang
    Shen, Qiao
    Wang, Yufu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2018, 232 (10) : 1261 - 1272
  • [29] Microstructure and tensile properties of 5083 Al matrix composites reinforced with graphene oxide and graphene nanoplates prepared by pressure infiltration method
    Shao, Puzhen
    Yang, Wenshu
    Zhang, Qiang
    Meng, Qingyu
    Tan, Xin
    Xiu, Ziyang
    Qiao, Jing
    Yu, Zhenhe
    Wu, Gaohui
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 109 : 151 - 162
  • [30] Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency-a review
    Omrani, Emad
    Moghadam, Afsaneh Dorri
    Menezes, Pradeep L.
    Rohatgi, Pradeep K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4) : 325 - 346
12345