Study on the Formation Mechanism of Surface Color of Oxide Film for Ti-6Al-4V in Cutting Process

被引：1
作者：
Li, Jinquan [1 ]
Zhang, Feng [1 ]
You, Xiaomei [1 ]
机构：
[1] Shenyang Ligong Univ, Sch Mech Engn, Shenyang 110159, Peoples R China
来源：
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2024年 / 25卷 / 07期
基金：
中国国家自然科学基金;
关键词：
Titanium alloy; Oxide film; Film interference; Cutting; TITANIUM;
D O I：
10.1007/s12541-024-01000-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The oxide film can be formed on the cutting surface of titanium alloy during cutting process, which affects the mechanics performance of titanium alloy. The single factor dry cutting experiment was carried out for the titanium alloy (Ti-6Al-4V) to investigate the formation mechanism of the color of oxide film. The oxide film consists of Anatase type TiO2, Rutile type TiO2 and Al2O3. The content of Al2O3 and rutile TiO2 increases with increasing feed rate. The surface of oxide film appears different colors. The larger the feed rate, the larger the wavelength of the different colors. The oxide film thickness tends to increase and is not uniform to produce different optical path differences in the cutting process, appearing different colors on the surface of oxide film.
引用
收藏
页码：1351 / 1358
页数：8
相关论文
共 22 条
[11]   Effect of the feed rate on three-dimensional topography of Ti-6Al-4V based on dynamic mechanical model analysis in cutting process [J].
Li, Jinquan ;
Wang, Chenyu .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (1-4) :1539-1547
[12]  
Liu G., 2021, J Mech Eng, V57, P231, DOI DOI 10.3901/JME.2021.15.231
[13]   Functional and Environmental Advantage of Cleaning Ti5B1 Master Alloy [J].
Mitrasinovic, Aleksandar ;
Tomic, Milos .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2022, 9 (03) :783-793
[14]   Influence of the oxidation behavior of Ti-6Al-4V alloy in dry air on the oxide layer microstructure [J].
Mohamed, Lamiaa Z. ;
Abd Elmomen, S. S. ;
El-Hadad, Shimaa .
CHEMICAL PAPERS, 2022, 76 (03) :1627-1638
[15]   Titanium Alloys Anodic Oxidation: Effect of Experimental Parameters on Surface Colouring [J].
Napoli, Giuseppe ;
Zitelli, Chiara ;
Corapi, Domenico ;
Di Schino, Andrea .
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 :730-734
[16]   Improvement of Ti-6Al-4V surface integrity through the use of high-speed ultrasonic vibration cutting [J].
Peng, Zhenlong ;
Zhang, Xiangyu ;
Zhang, Deyuan .
TRIBOLOGY INTERNATIONAL, 2021, 160
[17]   A study of oxide layer growth on the surface of aluminium alloys with Ti, Zr, Hf during heating in air [J].
Popov, N. A. ;
Skachkov, V. S. ;
Akashev, L. A. ;
Eselevich, D. A. ;
Baklanova, I., V .
THIN SOLID FILMS, 2021, 738
[18]  
[隋欣梦 Sui Xinmeng], 2020, [表面技术, Surface Technology], V49, P21
[19]   High capacity color code prepared on titanium alloy using femtosecond laser [J].
Sun, Xiaoyun ;
Wang, Wenjun ;
Mei, Xuesong ;
Pan, Aifei ;
Chen, Yuhu ;
Cui, Jianlei .
OPTICS AND LASER TECHNOLOGY, 2022, 145
[20]   Oxidation kinetics and microstructure evolution of air oxidation behavior of TC18 alloy [J].
Xi, Aiying ;
Zhuo, Longchao ;
Shao, Hui ;
Shan, Di ;
Sun, Feng ;
Lu, Jinwen ;
Ji, Kaile ;
Chen, Bingqing ;
Zhao, Xiaohua ;
Wang, Kaixuan .
VACUUM, 2022, 204
123