Optimization of Flow and Mixing in a Venturi Tube Mixer with a Two-Step Method Using Numerical Simulation

被引:4
作者
Tang, Zhenxin [1 ]
Huang, Fenglei [2 ]
Yao, Zixiong [1 ]
Cai, Ziqi [1 ]
Ma, Xin [1 ]
Li, Zhipeng [1 ]
Gao, Zhengming [1 ]
机构
[1] Beijing Univ Chem Technol, Sch Chem Engn, State Key Lab Chem Resource Engn, Beijing 100029, Peoples R China
[2] China Natl Bluestar Grp Co Ltd, Beijing 100029, Peoples R China
基金
中国国家自然科学基金;
关键词
Venturi tube mixer; mixing; flow; numerical simulation; JET;
D O I
10.3390/pr11041083
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
To achieve efficient mixing in a Venturi tube mixer (VTM), an optimization with a two-step method for this mixing device based on a Venturi tube (VT) was carried out using numerical simulation. Firstly, the effects of the structural parameters on the flow in VT were revealed, and the optimized configuration was determined for the following VTM. Subsequently, by introducing a jetting tube, the suction capacity, energy consumption and mixing quality were used to evaluate the performance of VTM under various configurations and operating conditions. According to the effects of the structural parameters on the mixing quality of VTM, an empirical formula for mixing quality with structural parameters was proposed. Finally, an optimized VTM was proposed. This work can provide a valid suggestion for the design and optimization of such a mixing device.
引用
收藏
页数:26
相关论文
共 27 条
[1]  
Caetano N.M., 2019, VIBRATION ENG TECHNO, P121
[2]   Numerical modelling of effects of ultrasound-induced acoustic streaming on hydrodynamics in a confined impinging jet reactor using a non-linear model based on local velocity fluctuation [J].
Chen, Luming ;
Du, Qiang ;
Guo, Yanqin ;
Yang, Xiaogang ;
Chen, Bingbing .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2023, 183
[3]   Particle Image Velocimetry (PIV) Investigation of Flow Characteristics in Confined Impinging Jet Reactors [J].
Gao, Zhengming ;
Han, Jing ;
Xu, Yingdao ;
Bao, Yuyun ;
Li, Zhipeng .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (33) :11779-11786
[4]  
Goharzadeh A., 2010, P ASME INT MECH ENG, V6, P217
[5]   Experimental investigation of liquid-liquid mixing in T-shaped micro-mixers using μ-LIF and μ-PIV [J].
Hoffmann, M ;
Schlüter, M ;
Räbiger, N .
CHEMICAL ENGINEERING SCIENCE, 2006, 61 (09) :2968-2976
[6]   The development of new heterogeneous catalytic processes for the production of ε-caprolactam [J].
Ichihashi, H ;
Sato, H .
APPLIED CATALYSIS A-GENERAL, 2001, 221 (1-2) :359-366
[7]   Analysis of mixing of impinging radial jets with crossflow in the regime of counter flow jet formation [J].
Kartaev, E. V. ;
Emel'kin, V. A. ;
Ktalkherman, M. G. ;
Kuz'min, V. I. ;
Aul'chenko, S. M. ;
Vashenko, S. P. .
CHEMICAL ENGINEERING SCIENCE, 2014, 119 :1-9
[8]   Surfactant-free synthesis of extremely small stimuli-responsive colloidal gels using a confined impinging jet reactor [J].
Kather, Michael ;
Ritter, Florian ;
Pich, Andrij .
CHEMICAL ENGINEERING JOURNAL, 2018, 344 :375-379
[9]   Numerical and Experimental Study on the Internal Flow of the Venturi Injector [J].
Li, Hao ;
Li, Hong ;
Huang, Xiuqiao ;
Han, Qibiao ;
Yuan, Ye ;
Qi, Bin .
PROCESSES, 2020, 8 (01)
[10]  
Li JianIan Li JianIan, 2012, Transactions of the Chinese Society of Agricultural Engineering, V28, P105