Shock-induced deformation and spallation in CoCrFeMnNi high-entropy alloys at high strain-rates

被引:44
作者
Li, Wanghui [1 ]
Chen, Shuai [1 ]
Aitken, Zachary [1 ]
Zhang, Yong -Wei [1 ]
机构
[1] ASTAR, Inst High Performance Comp IHPC, 1 Fusionopolis Way,16-16 Connexis, Singapore 138632, Singapore
关键词
High -entropy alloy; Shock loading; Plasticity; Chemical short-range ordering; Spallation; STACKING-FAULT ENERGIES; MECHANICAL-PROPERTIES; PHASE-TRANSFORMATION; LATTICE DISTORTION; COMPRESSION; BEHAVIOR; SINGLE; TEMPERATURE; PLASTICITY; EVOLUTION;
D O I
10.1016/j.ijplas.2023.103691
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Shock-induced deformation and fracture in single-crystalline and nanocrystalline CoCrFeMnNi high-entropy alloys (HEAs) under different shock intensities are investigated systematically using large-scale molecular dynamics simulations. The strong anisotropy in the single-crystalline HEA and how the reversibility of HCP-structured atoms influences the void nucleation and growth are revealed. Specifically, shock-induced FCC to HCP structural transformations are largely reversible in the case of the [001] loading direction, leading to homogeneous void nucleation; while they are largely irreversible in the cases of the [110] and [111] loading directions, resulting in void nucleation in the intersection of HCP layers. In nanocrystalline HEA, the deformations in the grain interior are similar to those in the single crystals, while the grain boundaries serve as void nucleation sites and thus weaken the spall strength. The SRO effects on the shock response in single-crystalline and nanocrystalline CoCrFeMnNi HEA are revealed, and the chemical heterogeneity is analyzed. Our results show that SRO can only slightly increase the shear stress and the spall strength, but it can cause a reduction of ductility during the spallation. The differences in SRO effects between single-crystalline and nanocrystalline models are attributed to the grain boundaries, where Cr and Mn are favorable, while Ni is favored inside the grains in the SRO model. Moreover, the comparison between CoCrFeMnNi HEA and its subsystem as well as singleelement metal indicates Mn seems to be the most influential elements in CoCrFeMnNi HEA, resulting in significant changes in strength. A relation between the spall strength and strain rate is proposed to describe the simulation results and reported experimental data. Our comprehensive and systematical studies provide deep insights into the deformation and fracture in CoCrFeMnNi HEA subjected to shock loading, which deepens the understanding on the dynamic deformations of CoCrFeMnNi HEA and benefits the rational design of new HEAs/MEAs with enhanced performance.
引用
收藏
页数:31
相关论文
共 50 条
  • [21] Effect of carbon on recrystallised microstructures and properties of CoCrFeMnNi-type high-entropy alloys
    Klimova, M.
    Shaysultanov, D.
    Semenyuk, A.
    Zherebtsov, S.
    Stepanov, N.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 851
  • [22] Twinning in [001]-oriented single crystals of CoCrFeMnNi high-entropy alloy at tensile deformation
    Kireeva, I. V.
    Chumlyakov, Yu. I.
    Pobedennaya, Z. V.
    Vyrodova, A. V.
    Karaman, I.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 713 : 253 - 259
  • [23] Dynamic spall properties of an additively manufactured, high-entropy alloy (CoCrFeMnNi)
    Euser, V. K.
    Mangan, A. S.
    Jones, D. R.
    Martinez, D. T.
    Steckley, T. E.
    Agrawal, A. K.
    Thoma, D. J.
    Fensin, S. J.
    MATERIALIA, 2024, 33
  • [24] Nanostructured Oxide-Dispersion-Strengthened CoCrFeMnNi High-Entropy Alloys with High Thermal Stability
    Zhang, Xiang
    Wang, Fei
    Yan, Xueliang
    Li, Xing-Zhong
    Hattar, Khalid
    Cui, Bai
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (09)
  • [25] Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy
    Joo, S. -H.
    Kato, H.
    Jang, M. J.
    Moon, J.
    Tsai, C. W.
    Yeh, J. W.
    Kim, H. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 689 : 122 - 133
  • [26] Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior
    Li, Zhiming
    ACTA MATERIALIA, 2019, 164 : 400 - 412
  • [27] Temperature-dependent cyclic deformation behavior of CoCrFeMnNi high-entropy alloy
    Lu, Kaiju
    Chauhan, Ankur
    Litvinov, Dimitri
    Aktaa, Jarir
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 160
  • [28] Molecular dynamics study of temperature effects on shock response and plastic deformation mechanism of CoCrFeMnNi high-entropy alloys
    Wen Peng
    Tao Gang
    ACTA PHYSICA SINICA, 2022, 71 (24)
  • [29] Strong yet strain-hardenable equiatomic CoCrFeMnNi high-entropy alloys by dynamic heterostructuring
    Lee, Jungwan
    Park, Hyojin
    Son, Sujung
    Nakano, Takayoshi
    Kim, Hyoung Seop
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 965
  • [30] Nanoprecipitate improves high strain-rate deformability in a high-entropy alloy
    Yu, Yong-Zheng
    Shi, Ru-Yu
    Zhang, Yang
    Liu, Li-Yuan
    Li, Jun-Peng
    Guo, Chun-Huan
    Jiang, Feng-Chun
    Liaw, Peter K.
    Zhang, Zhong-Wu
    TUNGSTEN, 2024, : 298 - 313