Promotion Effect of Micro-Hole in Dielectric on Ozone Generation of Dielectric Barrier Discharge

Ozone is widely used in industrial production, disinfection, and pollution control. To improve the ozone generation ability of dielectric barrier discharge (DBD), micro-holes with a diameter of about 50 mu m in dielectric were introduced to optimize the discharge process. Experimental results indicate that the micro-holes in dielectric can increase the ozone concentration by lowering the inception voltage and boosting the intensity of electric discharge of the DBD device. A voltage of 16.7 kV and flow rate of 3 L/min, the DBD device with 40 micro-holes has an ozone concentration of 680 mg / L and provides an ozone yield of 320 g / kWh, while the device without micro-holes has an ozone concentration of only 150 mg/L and provides an ozone yield of only 180 g/kWh. The micro-hole in the dielectric plays the effect similar to that of micro hollow cathode, which can not only directly affect the ozone generation ability, but also affect the effect of other factors on ozone generation, such as discharge voltage, air flow rate, and gap space between dielectrics. The promotion of ozone generation by micro-hole can be used to design high-performance ozone generators and provide ideas for reusing ozone generators damaged by dielectric breakdown.