A Non-Stationarity Analysis of Annual Maximum Floods: A Case Study of Campaspe River Basin, Australia

A design flood is an essential input for water infrastructure design and flood protection. A flood frequency analysis has been traditionally performed under stationarity assumption indicating that the statistical properties of historical flooding will not change over time. Climate change and variability challenges the stationarity assumption, and a flood frequency analysis without consideration of non-stationarity can result in under- or overestimation of the design floods. In this study, non-stationarity of annual maximum floods (AMFs) was investigated through a methodology consisting of trend and change point tests, and non-stationary Generalized Extreme Value (NSGEV) models, and the methodology was applied to Campaspe River Basin as a case study. Statistically significant decreasing trends in AMFs were detected for almost all stations at the 0.01 significance level in Campaspe River Basin. NSGEV models outperformed the stationary counterparts (SGEV) for some stations based on statistical methods (i.e., Akaike information criterion (AIC) and Bayesian information criterion (BIC)) and graphical approaches (i.e., probability and quantile plots). For example, at Station 406235, AIC and BIC values were found to be 334 and 339, respectively, for the SGEV model, whereas AIC and BIC values were calculated as 330 and 334, respectively, for the NSGEV 15 model with time-varying location and scale parameters. Deriving a design flood from conventional stationary models will result in uneconomical water infrastructure design and poor water resource planning and management in the study basin.