Origin of hot cracking formation and suppression method in laser additive manufactured nickel-based superalloys

被引：13

作者：

Wang, Jiawei ^{[1
,2
]}

Wang, Huaming ^{[1
,2
,3
]}

Gao, Hongwei ^{[1
,2
,3
]}

Deng, Hongwen ^{[1
,2
,3
]}

Zhang, Meiling ^{[1
,2
]}

Cheng, Xu ^{[1
,2
,3
]}

Zhang, Shuquan ^{[2
]}

Liu, Dong ^{[2
]}

机构：

[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China

[2] Natl Engn Lab Addit Mfg Large Met Components, Beijing 100191, Peoples R China

[3] Beihang Univ, Res Inst Frontier Sci, Beijing 100191, Peoples R China

来源：

MATERIALS LETTERS | 2023年 / 352卷

关键词：

Metals and alloys; Laser processing; Nickel -based superalloy; Hot cracking; ALLOYS;

D O I：

10.1016/j.matlet.2023.135200

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Although laser additive manufacturing is a promising technique for fabricating nickel-based single crystal superalloy components, reducing hot cracking during the deposition is still a challenge. In this study, the cracking susceptibility and microstructures with different substrates are investigated. Results show that samples exhibit much lower cracking susceptibility when using the directional solidified substrates than the cast polycrystalline substrates. Hot cracking is attributed to a stable liquid film dependent on the misorientation angle. Besides, liquation cracking first occurs in the substrate and could propagate by extension into solidification cracks along the high angle grain boundaries. Based on these findings, a crack-free nickel-based superalloy with a polycrystalline substrate is successfully prepared using a continuous scanning strategy.

引用

页数：4

共 9 条

[1] THEORY OF DISLOCATIONS [J].

COTTRELL, AH .

PROGRESS IN METAL PHYSICS, 1953, 4 :205-264

[2]

Gäumann M, 2001, ACTA MATER, V49, P1051, DOI 10.1016/S1359-6454(00)00367-0

[3] Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition [J].

Lu, Nannan ;

Lei, Zhenglong ;

Hu, Kuan ;

Yu, Xingfu ;

Li, Peng ;

Bi, Jiang ;

Wu, Shibo ;

Chen, Yanbin .

ADDITIVE MANUFACTURING, 2020, 34

[4] Indentation behavior of creep-feed grinding induced gradient microstructures in single crystal nickel-based superalloy [J].

Miao, Qing ;

Ding, Wenfeng ;

Kuang, Weijie ;

Fu, Yucan ;

Yin, Zhen ;

Dai, Chenwei ;

Cao, Lijie ;

Wang, Hongcai .

MATERIALS LETTERS, 2022, 306

[5] A defect-resistant Co-Ni superalloy for 3D printing [J].

Murray, Sean P. ;

Pusch, Kira M. ;

Polonsky, Andrew T. ;

Torbet, Chris J. ;

Seward, Gareth G. E. ;

Zhou, Ning ;

Forsik, Stephane A. J. ;

Nandwana, Peeyush ;

Kirka, Michael M. ;

Dehoff, Ryan R. ;

Slye, William E. ;

Pollock, Tresa M. .

NATURE COMMUNICATIONS, 2020, 11 (01)

[6] Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence [J].

Rappaz, M ;

Jacot, A ;

Boettinger, WJ .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34 (03) :467-479

[7] Pressure influence on the grain boundary wetting phase transition in Fe-Si alloys [J].

Straumal, B ;

Rabkin, E ;

Lojkowski, W ;

Gust, W ;

Shvindlerman, LS .

ACTA MATERIALIA, 1997, 45 (05) :1931-1940

[8] Tie lines of the grain boundary wetting phase transition in the Zn-rich part of the Zn-Sn phase diagram [J].

Straumal, BB ;

Gust, W ;

Watanabe, T .

INTERGRANULAR AND INTERPHASE BOUNDARIES IN MATERIALS, IIB98, 1999, 294-2 :411-414

[9] The Grain Boundary Wetting Phenomena in the Ti-Containing High-Entropy Alloys: A Review [J].

Straumal, Boris B. ;

Korneva, Anna ;

Kuzmin, Alexei ;

Lopez, Gabriel A. ;

Rabkin, Eugen ;

Straumal, Alexander B. ;

Gerstein, Gregory ;

Gornakova, Alena S. .

METALS, 2021, 11 (11)

← 1 →