A novel method for improving the microstructure and the properties of Al-Si-Cu alloys prepared using rapid solidification/powder metallurgy

被引：14
|
作者：
Zhao, Xingming [1 ]
Meng, Jingran [1 ]
Zhang, Chi [1 ]
Wei, Wei [1 ]
Wu, Fufa [1 ]
Zhang, Guangan [1 ]
机构：
[1] Liaoning Univ Technol, Sch Mat Sci & Engn, Mat Proc Engn, Jinzhou 121001, Peoples R China
来源：
MATERIALS TODAY COMMUNICATIONS | 2023年 / 35卷
关键词：
Rapid solidification; powder metallurgy; Al; -Si; -Cu; Extrusion; Crushed oxide film; Mechanical properties; ALUMINUM-ALLOYS; TENSILE PROPERTIES; BEHAVIOR; COMPOSITES; PARAMETERS; MECHANISM;
D O I：
10.1016/j.mtcomm.2023.105802
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel method based on the combination of rapid solidification/powder metallurgy with hot extrusion was proposed in the present study for improving the microstructure and properties of Al-Si-Cu alloys. The phase composition, microstructure, and mechanical properties of the extruded Al-Si-Cu alloy were systematically investigated. The experimental results revealed that the extruded Al-Si-Cu alloy comprised five kinds of phases, namely, the & alpha;-Al, fi-Si, Al2O3, CuAl2, and Cu4Si phases. The extrusion process significantly reduced the porosity while improving the density of the Al-Si-Cu alloy. The tensile strength and elongation values of the extruded alloy were much larger than those of the unextruded alloy. The use of the proposed method improved the mechanical properties of the Al-Si-Cu alloy greatly compared to when using the traditional casting method.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] A novel process for the preparation of high-performance heat-resistant Al-Si-Fe alloy by powder metallurgy method
    Lv, Zhishuai
    Zhao, Xingming
    Chen, Jiabin
    Wei, Wei
    Zhu, Xiao
    Li, Honglin
    Liu, Xue
    Wang, Guangdong
    Zhao, Rongda
    Wu, Fufa
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [32] Microstructure, mechanical and frictional properties of CrCoNi-xNb alloys prepared through powder metallurgy
    Huang, Lin
    Zhang, Jingyu
    Xiong, Ke
    Wang, Xiaofeng
    Feng, Wei
    INTERMETALLICS, 2024, 175
  • [33] kThe effect of titanium addition on the microstructure, mechanical and tribological properties of Ni3Si alloys prepared by powder metallurgy method
    Zhang, X.
    Niu, M.
    Wu, C.
    Chen, J.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2019, 50 (12) : 1537 - 1544
  • [34] Effect of Mn on microstructure and properties of Cu-12Al powder metallurgy alloy
    Zhang, Guofei
    Yin, Haiqing
    Zhang, Cong
    Deng, Zhenghua
    Zhang, Ruijie
    Jiang, Xue
    Qu, Xuanhui
    MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
  • [35] Microstructure and properties of Cu-Al2O3 composites prepared by powder metallurgy
    Besterci, M
    Kovác, L
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2003, 18 (1-3): : 26 - 56
  • [36] Effect of microstructure and heat treatment of hypereutectic Al-Si alloys obtained by Rapid Solidification
    Huircapan, Marcela Pichipil
    Franco, Mercedes
    De Rosa, Horacio
    MATERIA-RIO DE JANEIRO, 2022, 27 (02):
  • [37] Mechanical properties and thermal stability of Al-23Si-8Fe-1Cr and Al-23Si-8Fe-5Mn alloys prepared by powder metallurgy
    Prusa, F.
    Vojtech, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 565 : 13 - 20
  • [38] The Effects of Fe-Particles on the Tensile Properties of Al-Si-Cu Alloys
    Bjurenstedt, Anton
    Seifeddine, Salem
    Jarfors, Anders E. W.
    METALS, 2016, 6 (12)
  • [39] Microstructure and corrosion properties of CoCrCuFeMnNix high-entropy alloys prepared by powder metallurgy
    Zhao, Rui-Feng
    Jiang, Ai-Yun
    Ren, Bo
    Chen, Chong
    Liu, Jian-Xiu
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2023, 74 (07): : 1076 - 1085
  • [40] Effect of the Addition of La and Ce on the Solidification Behavior of Al-Cu and Al-Si-Cu Cast Alloys
    Mahmoud, M. G.
    Samuel, A. M.
    Doty, H. W.
    Samuel, F. H.
    INTERNATIONAL JOURNAL OF METALCASTING, 2020, 14 (01) : 191 - 206
12345