Effects of misorientation on single crystal plasticity by finite element methods

The crystal plasticity finite element method (CPFEM) is a widely used technique for resolving macroscopic stress and strain onto the physically relevant length scales of grains and slip systems in ductile crystalline materials like structural metals. Here, the calibration of a CPFEM model for single crystal applications was found to depend critically on loading orientation, with an effect significant even at an angle of 0.1. Slight misorientation from high symmetry loading affected lattice rotation during tensile deformation, changing the number of active slip systems, and, as a result, the overall stress-strain behavior. The strongest misorientation effects occurred around the multi-slip orientations of [001], [111], [101], and [102], while the single slip orientation of [213] showed a negligible effect, as expected, and the double slip orientation of [112] showed less of an effect than [102] due to its relative lattice orientation stability. The magnitude of the misorientation effect increased dramatically with the strength of slip system interaction, which, in the chosen hardening framework, is represented by the latent hardening coefficient. In a case study on [001] Cu, offsets of 0.3-2.0gave stress values at an engineering strain of 0.25 that were lower by 15-18% relative to the direct loading values, highlighting the importance of exact orientations for single crystal plasticity parameterization and application.