Fracture-toughness estimation from small-punch test in hydrogen exhibiting ductile and ductile-brittle fracture modes

被引：1
作者：
Hwang, Jin-Ha [1 ]
Seo, Ki-Wan [2 ]
Kim, Yun-Jae [2 ]
Kim, Ki-Seok [3 ]
机构：
[1] Pukyong Natl Univ, Dept Mech Design Engn, Pusan 48513, South Korea
[2] Korea Univ, Dept Mech Engn, Seoul 02841, South Korea
[3] POSCO, Global R&D Ctr 100, Incheon 21985, South Korea
来源：
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS | 2024年 / 103卷
关键词：
Combined ductile and brittle fracture mode; Ductile fracture mode; Fracture toughness estimation; Small punch test in hydrogen; X70 PIPELINE STEEL; HEAT-AFFECTED ZONE; MECHANICAL-PROPERTIES; STRESS INTENSITY; EMBRITTLEMENT; STRAIN; TRANSITION; BEHAVIOR;
D O I：
10.1016/j.euromechsol.2023.105193
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In this study, an energy-based fracture toughness estimation method based on a small-punch test in a hydrogen environment, exhibiting either ductile or combined ductile and brittle fracture modes is proposed. For the ductile fracture mode, the energy term due to gas pressure in the small-punch test in hydrogen environment is simply added to the existing energy-based fracture toughness estimation equation. For the combined ductile and fracture mode, modified equations for the plastic energy term are proposed to correct overestimation due to brittle cracking. The estimated fracture toughness values are shown to consistent with the published API X70 and X42 test data.
引用
收藏
页数：12
相关论文
共 50 条
[41]   Indentation modeling study of temperature-dependent fracture toughness of brittle coating on ductile substrate based on microcrack formation theory [J].
Gu, Yichen ;
Chen, Kuiying ;
Liu, Rong ;
Yao, Matthew X. ;
Collier, Rachel .
SURFACE & COATINGS TECHNOLOGY, 2017, 309 :536-544
[42]   Use of multi-step loading small punch test to investigate the ductile-to brittle transition behaviour of a thermally sprayed CoNiCrAlY coating [J].
Chen, H. ;
Hyde, T. H. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 :203-209
[43]   Development of a method for extracting fracture toughness from instrumented Charpy impact tests in the ductile and transition regimes [J].
Chaouadi, R. ;
Gerard, R. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 115
[44]   A PERSPECTIVE OF THE SMALL PUNCH TEST APPLICATION TO THE EVALUATION OF HYDROGEN EMBRITTLEMENT IN STEELS: EFFECT OF PUNCH RATE ON FRACTURE PROPERTIES [J].
Arroyo, B. ;
Alvarez, J. A. ;
Gutierrez-Solana, F. ;
Sainz, J. ;
Lacalle, R. .
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 1A, 2019,
[45]   Determination of the fracture toughness of carburized Pyrowear 53 steel for planetary gears by the small punch test method [J].
Majchrowicz, Kamil ;
Romelczyk-Baishya, Barbara ;
Wieczorek-Czarnocka, Monika ;
Dobkowska, Anna ;
Raga, Krzysztof ;
Filip, Ryszard ;
Pakiela, Zbigniew .
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (03)
[46]   Effects of Aging Temperature, Time During Transition from Brittle to Ductile on Fracture Behavior of Zinc Coated AA7075 [J].
Manjunath, Ramesh ;
Kumar, Deepak .
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2020, 44 (03) :211-216
[47]   Calibration of ductile fracture criterion from shear to equibiaxial tension using hydraulic bulge test [J].
Mirnia, Mohammad Javad ;
Vahdani, Mostafa .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 280
[48]   Fracture toughness prediction of reactor grade materials using pre-notched small punch test specimens [J].
Kumar, Pradeep ;
Dutta, B. K. ;
Chattopadhyay, J. .
JOURNAL OF NUCLEAR MATERIALS, 2017, 495 :351-362
[49]   Determination of the fracture toughness by applying a structural integrity approach to pre-cracked Small Punch Test specimens [J].
Cuesta, I. I. ;
Alegre, J. M. .
ENGINEERING FRACTURE MECHANICS, 2011, 78 (02) :289-300
[50]   Estimation of elastic-plastic fracture toughness by numerical simulation based on a stress-based criterion for ductile crack initiation [J].
Kamaya, Masayuki .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2014, 117 :2-8
12345