Transient Study (Annual) of the Heat Transfer of a Two-Channel Solar Air Collector

被引:2
作者
Alvarez, Benjamin [1 ]
Arce, Jesus [1 ]
Colorado, Dario [2 ]
机构
[1] CENIDET, Natl Technol Inst Mexico, Dept Mech Engn, Cuernavaca 62490, Morelos, Mexico
[2] Veracruz Univ, Ctr Res Energy & Sustainable Resources, Coatzacoalcos 96535, Veracruz, Mexico
来源
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME | 2024年 / 146卷 / 01期
关键词
solar air collector; transient numerical model; parametric study; thermal performance; cost-benefit analysis; THERMAL PERFORMANCE; PLATE; SYSTEMS; VENTILATION; RADIATION; ENERGY; MODEL;
D O I
10.1115/1.4062875
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this paper, a numerical heat transfer study of a solar air collector with two channels (SAC-2C) was carried out. Energy global balances in two dimension (2D) and unsteady state were considered, as well as bio-climatic conditions of Toluca city in Mexico (sub-humid temperate climate). Six mass flowrates (0.01, 0.05, 0.1, 0.2, 0.4, and 0.5 kg/s) were considered during the numerical simulation, for the coldest and the warmest day of each month during a complete year (2019). Among the results, it was found that thermal efficiency of the system increases up to 35% when the mass flowrate changes from 0.01 to 0.2 kg/s, meanwhile, maximum efficiency of 84% were obtained for a mass flowrate of 0.5 kg/s. Finally, based on a cost-benefit analysis, it was determined that the SAC-2C has a recovery time of the initial investment ($ 250 USD) of three and a half years. So that the SAC-2C has the capacity to produce 1, 654, 451 kW h/m2 of clean energy annually, which is equivalent to ceasing to produce 871, 895 kg CO2 per square meter of installation.
引用
收藏
页数:15
相关论文
共 40 条
[1]   A simulation modeling for optimization of flat plate collector design in Riyadh, Saudi Arabia [J].
Al-Ajlan, SA ;
Al Faris, H ;
Khonkar, H .
RENEWABLE ENERGY, 2003, 28 (09) :1325-1339
[2]   Thermal performance of an air solar collector with an absorber plate made of recyclable aluminum cans [J].
Alvarez, G ;
Arce, J ;
Lira, L ;
Heras, MR .
SOLAR ENERGY, 2004, 77 (01) :107-113
[3]   Energy and exergy analysis of different solar air collector systems with natural convection [J].
Bahrehmand, D. ;
Ameri, M. .
RENEWABLE ENERGY, 2015, 74 :357-368
[4]  
Cengel Y. A., 2006, Mecanica de Fluidos: Fundamentos y Aplicaciones, V1st ed.
[5]   The theoretical and experimental research on thermal performance of solar air collector with finned absorber [J].
Chang, Wei ;
Wang, Yunfeng ;
Li, Ming ;
Luo, Xi ;
Ruan, Yongbao ;
Hong, Yongrui ;
Zhang, Shaobo .
INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY, SHC 2014, 2015, 70 :13-22
[6]   Effect of diffuse solar radiation on the thermal performance of solar collectors [J].
Chung, Kung-Ming ;
Chen, Chia-Chun ;
Chang, Keh-Chin .
CASE STUDIES IN THERMAL ENGINEERING, 2018, 12 :759-764
[7]   Exergy Optimization of a Novel Combination of a Liquid Air Energy Storage System and a Parabolic Trough Solar Collector Power Plant [J].
Derakhshan, Shahram ;
Khosravian, Mohammadreza .
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (08)
[8]  
Duffie JA, 2013, SOLAR ENGINEERING OF THERMAL PROCESSES, 4TH EDITION, P1, DOI 10.1002/9781118671603
[9]   Energy and exergy analysis of a thermosiphon and forced-circulation flat-plate solar collector using MWCNT/Water nanofluid [J].
Eltaweel, Mahmoud ;
Abdel-Rehim, Ahmed A. .
CASE STUDIES IN THERMAL ENGINEERING, 2019, 14
[10]   Performance assessment of an unglazed solar thermal collector for envelope retrofitting [J].
Garay Martinez, Roberto ;
Arregi Goikolea, Benat ;
Gomis Paya, Ignacio ;
Bonnamy, Paul ;
Raji, Saed ;
Lopez, Jerome .
INTERNATIONAL CONFERENCE - ALTERNATIVE AND RENEWABLE ENERGY QUEST (AREQ 2017), 2017, 115 :361-368