Impact of heat treatment on mechanical and tribological properties of metal matrix composites of AA6082 T6 with Tin, Zinc and graphite

被引：2

作者：

Ramesh, C. ^{[1
]}

Chandran, Mohanraj ^{[1
]}

Chellamuthu, K. ^{[2
]}

Sivakumar, A. ^{[3
]}

机构：

[1] M Kumarasamy Coll Engn, Dept Mech Engn, Karur 639113, India

[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Tiruchirappalli 621112, Tamil Nadu, India

[3] Kongu Engn Coll, Dept Mech Engn, Erode, Tamil Nadu, India

来源：

JOURNAL OF CERAMIC PROCESSING RESEARCH | 2023年 / 24卷 / 01期

关键词：

Heat treatment; Stir casting; Hardness; SEM; Wear; WEAR BEHAVIOR; ALUMINUM; MICROSTRUCTURE;

D O I：

10.36410/jcpr.2023.24.1.120

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this research article, the metal matrix composite with AA6082 was formed with mono Tin (5 wt%), Zinc (5 wt%), graphite (5 wt%) and hybrid. The solution heat treatment process and quenching with water and solidification were carried out and results were compared with AA6082 T6. The different analysis includes mechanical properties (Tensile strength, micro hardness), metallurgical properties (SEM and EDX) and tribological property (friction and wear). Micro structure of heat treated AA6082 MMC found with lower defects and fine grain size. Hardness values of heat treated AA6082+Zinc(A6) and hybrid AA6082(A8) found higher than AA6082 T6. The ultimate tensile strength of heat treated AA6082+Zinc(A6) and hybrid AA6082(A8) observed higher than AA6082 T6. The wear and friction rate also reduced with heat treated AA6082+Zinc and AA6082 hybrid metal matrix composites.

引用

页码：120 / 126

页数：7

共 50 条

[41] Impact of T6 heat treatment on the microstructure and mechanical characterization of Al7075-graphene nanoplatelets- Beryl hybrid composites
Juhany, Khalid A.
Patil, Shanawaz
Pasha, Amjad Ali
Nagaral, Madeva
Interactions, 2024, 245 (01)
[42] Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting
S. Souissi
H. Barhoumi
F. M. ben Amar
Physics of Metals and Metallography, 2019, 120 : 806 - 812
[43] Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting
Souissi, S.
Barhoumi, H.
ben Amar, M.
Elhalouani, F.
PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (08): : 806 - 812
[44] Impacts of T6 heat treatment on the microstructural, mechanical, and corrosion properties of thixoformed AA7075 alloy produced by cooling slope casting
Acar, Serhat
Guler, Kerem Altug
MATERIALS RESEARCH EXPRESS, 2024, 11 (10)
[45] Optimization of the T6 Heat Treatment to Improve the Mechanical Properties of Alloy AlSi12CuNiMg
Pezda, J.
METAL SCIENCE AND HEAT TREATMENT, 2015, 57 (5-6) : 286 - 290
[46] STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR WELDING JOINTS OF IN-SITU Al3Zr/AA6082 PARTICLE-REINFORCED ALUMINUM MATRIX COMPOSITES
Hui, Li
Sun Caizhi
Feng, Wang
Qiao Yuanpeng
Li Chuying
Xu Pinyi
Andrii, Zatulovskiy
Volodymyr, Shcheretskyi
ARCHIVES OF METALLURGY AND MATERIALS, 2023, 68 (03) : 907 - 919
[47] Optimization of the T6 Heat Treatment to Improve the Mechanical Properties of Alloy AlSi12CuNiMg
J. Pezda
Metal Science and Heat Treatment, 2015, 57 : 286 - 290
[48] Effect of reinforcement volume fraction and T6 heat treatment on microstructure, thermal and mechanical properties of mesophase pitch-based carbon fiber reinforced aluminum matrix composites
Zhu, Chengnan
Wang, Xiaozhen
Cui, Qifeng
Gu, Shaojing
Liu, Kan
Cai, Yunpeng
Su, Yishi
Zhang, Di
Ouyang, Qiubao
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 834
[49] Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al-12Si-3Cu based alloy
Beder, M.
Alemdag, Y.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (08) : 2208 - 2219
[50] SOLUTION HEAT-TREATMENT EFFECTS ON THE MECHANICAL-PROPERTIES OF A357 T6 ALLOYS
MEYERS, CW
JOURNAL OF METALS, 1985, 37 (08): : A10 - A10

← 1 2 3 4 5 →