Impact of heat treatment on mechanical and tribological properties of metal matrix composites of AA6082 T6 with Tin, Zinc and graphite

被引：2
|
作者：
Ramesh, C. [1 ]
Chandran, Mohanraj [1 ]
Chellamuthu, K. [2 ]
Sivakumar, A. [3 ]
机构：
[1] M Kumarasamy Coll Engn, Dept Mech Engn, Karur 639113, India
[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Tiruchirappalli 621112, Tamil Nadu, India
[3] Kongu Engn Coll, Dept Mech Engn, Erode, Tamil Nadu, India
来源：
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2023年 / 24卷 / 01期
关键词：
Heat treatment; Stir casting; Hardness; SEM; Wear; WEAR BEHAVIOR; ALUMINUM; MICROSTRUCTURE;
D O I：
10.36410/jcpr.2023.24.1.120
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research article, the metal matrix composite with AA6082 was formed with mono Tin (5 wt%), Zinc (5 wt%), graphite (5 wt%) and hybrid. The solution heat treatment process and quenching with water and solidification were carried out and results were compared with AA6082 T6. The different analysis includes mechanical properties (Tensile strength, micro hardness), metallurgical properties (SEM and EDX) and tribological property (friction and wear). Micro structure of heat treated AA6082 MMC found with lower defects and fine grain size. Hardness values of heat treated AA6082+Zinc(A6) and hybrid AA6082(A8) found higher than AA6082 T6. The ultimate tensile strength of heat treated AA6082+Zinc(A6) and hybrid AA6082(A8) observed higher than AA6082 T6. The wear and friction rate also reduced with heat treated AA6082+Zinc and AA6082 hybrid metal matrix composites.
引用
收藏
页码：120 / 126
页数：7
相关论文
共 50 条
  • [31] Mechanical and tribological properties of zinc-aluminium (ZA-27) metal matrix composites: a review
    Singh, Pawandeep
    Mishra, R. K.
    Singh, Balbir
    Gupta, Vivudh
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2025, 11 (01) : 73 - 91
  • [32] Effects of Different Solid Solution Temperatures on Microstructure and Mechanical Properties of the AA7075 Alloy After T6 Heat Treatment
    Tekeli, Suleyman
    Simsek, Ijlal
    Simsek, Dogan
    Ozyurek, Dursun
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2019, 38 (2019) : 892 - 896
  • [33] Effects of Porosity, Heat Input and Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of TIG Welded Joints of AA6082-T6
    Wang, Bo
    Xue, Songbai
    Ma, Chaoli
    Wang, Jianxin
    Lin, Zhongqiang
    METALS, 2017, 7 (11):
  • [34] Experimental Investigation of WE43(T6) magnesium metal matrix composites to enhance mechanical properties and EDM process parameters
    Karthik, S.
    Karunakaran, P.
    Velmurugan, G.
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2024, 19 (05):
  • [35] Microstructure and tribological properties of Al 7075-TiO2@CNTs composites under T6 treatment
    Liu, Zhibin
    Yan, Hong
    Tu, Kai
    Xiong, JunJie
    Vacuum, 2022, 199
  • [36] Influence of Heat Treatment on Mechanical and Corrosion Properties of Aluminium Metal Matrix composites (AA 6061 reinforced with MoS2)
    Rao, E. Subba
    Ramanaiah, N.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 11270 - 11278
  • [37] Heat treatment of AA 6082 T6 aluminum alloy coated with thin Al2O3 layer by fluidized bed
    G. Rubino
    F. Trovalusci
    M. Barletta
    P. Fanelli
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 2605 - 2618
  • [38] Microstructure and tribological properties of Al 7075-TiO2@CNTs composites under T6 treatment
    Liu, Zhibin
    Yan, Hong
    Tu, Kai
    Xiong, JunJie
    VACUUM, 2022, 199
  • [39] Heat treatment of AA 6082 T6 aluminum alloy coated with thin Al2O3 layer by fluidized bed
    Rubino, G.
    Trovalusci, F.
    Barletta, M.
    Fanelli, P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (5-8): : 2605 - 2618
  • [40] Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite
    Beldar, Pankaj
    Kadbhane, Snehal
    MATERIALS LETTERS, 2025, 382
12345