Reduction of Energy Consumption for Suspension Separation Process Implementation in Hydrocyclones

被引：0
作者：
Lagutkin, M. G. [1 ]
Shulyak, A. N. [2 ]
Baranova, E. Yu. [2 ]
机构：
[1] A Russian Technol Univ, Moscow Inst Radio Engn Elect & Automat MIREA, Moscow, Russia
[2] Moscow Polytech Univ, Moscow, Russia
来源：
CHEMICAL AND PETROLEUM ENGINEERING | 2023年 / 59卷 / 5-6期
关键词：
hydrocyclone; separation boundary grain; separation indicators; volume output; phase density; energy consumption; rational parameters; calculation;
D O I：
10.1007/s10556-024-01262-4
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The problem of judicious selection of hydrocyclone design parameters to minimize energy consumption while ensuring the required suspension separation indicators with a prescribed volume output was studied. Theoretical analysis showed that energy consumption would be minimal if the inlet pipe diameter is 0.366 part of the diameter of the cylindrical part of the hydrocyclone and the diameter of the top drain-pipe, which can be determined by an equation depending on the angle of the tapering part of the hydrocyclone and on the ratio of the diameter of the separation boundary grain to the diameter of the tapering part of the hydrocyclone. The dispersed phase to dispersion medium density ratio does not affect energy consumption.
引用
收藏
页码：449 / 456
页数：8
相关论文
共 5 条
[1]   HYDROCYCLONES FOR THE CHEMICAL INDUSTRY AND CLEANING DEVICES FOR CIRCULATING AND WASTE WATER [J].
Baranov, D. A. ;
Pronin, A. I. ;
Dikov, V. A. ;
Ivanov, A. A. ;
Kolesova, N. A. ;
Balakhnin, I. A. ;
Lagutkin, M. G. .
CHEMICAL AND PETROLEUM ENGINEERING, 2007, 43 (7-8) :385-388
[2]  
GOST, 1071881 GOST
[3]   Influence of Geometric Parameters of Hydrocyclone on Hydraulic Resistance and Efficiency of Suspension Separation Process [J].
Lagutkin, M. G. ;
Baranova, E. Yu ;
Shulyak, A. N. ;
Starostin, A., V .
CHEMICAL AND PETROLEUM ENGINEERING, 2022, 57 (9-10) :807-815
[4]  
Lagutkin M. G., 2012, EKOL PROM ROS, P1
[5]  
Ternovsky I. G., 1994, HYDROCYCLONING
1