Enhancing Strength and Sustainability: Evaluating Glass and Basalt Fiber-Reinforced Biopolyamide as Alternatives for Petroleum-Based Polyamide Composite

This study aims to analyze strength properties and low-cycle dynamic tests of composite materials modified with glass and basalt fibers. Biopolyamide 4.10 was used as the matrix, and the fiber contents were 15, 30, and 50% by weight. Static tensile tests, impact tests, and determination of mechanical hysteresis loops were carried out as strength tests. The length of the fibers in the produced composites and their processing properties were determined. The composite materials were compared with commercially available glass fiber-reinforced composites with 30 and 50% fiber contents. The results showed that such composites can successfully replace composite materials based on petroleum-based polymeric materials, providing high strength properties and reducing the negative environmental impact by using renewable sources. Composites with 30% basalt fiber composition were characterized by higher tensile strength by about 60% compared to commercially available composites with 30% glass fiber composition and an almost doubly increased Young's modulus. Increasing the content of basalt fibers to 50% results in a further increase in strength properties. Despite the lower tensile strength compared to polyamide 6 with 50% glass fiber content, basalt fibers provided an approximately 10% higher modulus of elasticity.