High-Temperature Oxidation Behaviour of CrSi Coatings on 316 Austenitic Stainless Steel

被引:4
作者
Gurtaran, Mikdat [1 ]
Zhang, Zhenxue [1 ]
Li, Xiaoying [1 ]
Dong, Hanshan [1 ]
机构
[1] Univ Birmingham, Sch Met & Mat, Birmingham B15 2TT, England
基金
欧盟地平线“2020”;
关键词
CrSi coatings; magnetron sputtering; oxidation; 316 stainless steel; TRIBOLOGICAL BEHAVIOR; CORROSION-RESISTANCE; CHROMIUM; MECHANISM; KINETICS; SURFACE; TIN; AL;
D O I
10.3390/ma16093533
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this study, a closed-field unbalanced magnetron sputtering system, which is environmentally friendly and has high deposition efficiency, was used to deposit CrSi coatings on 316 austenitic stainless steel. This system utilised separate Cr and Si targets, and the appropriate content of Cr and Si of the coatings was adjusted by changing the currents applied to the targets. A series of CrSi coatings with different Si/Cr ratios were produced, and their oxidation behaviour at elevated temperatures was investigated. By analysing the weight gain, surface morphology and microstructure, composition and phase constituents, the oxidation behaviour at 600 degrees C, 700 degrees C and 800 degrees C was investigated and the optimized coating to protect the stainless steel has been identified. The outcome of the research indicated that a small amount of Si (between 4-7 at.%) in Cr coatings is effective in protecting the austenitic stainless steel against oxidation at high temperatures, while a high Si content (around 10 at.% or more) makes the coating more brittle and prone to cracking or delamination during oxidation at 800 degrees C.
引用
收藏
页数:12
相关论文
共 41 条
[1]  
Adzali Nur Maizatul Shima, 2020, Materials Science Forum, V1010, P28, DOI 10.4028/www.scientific.net/MSF.1010.28
[2]   Aluminum Oxide Ceramic Coatings on 316l Austenitic Steel Obtained by Plasma Electrolysis Oxidation Using a Pulsed Unipolar Power Supply [J].
Andrei, Victor Aurel ;
Radulescu, Cristiana ;
Malinovschi, Viorel ;
Marin, Alexandru ;
Coaca, Elisabeta ;
Mihalache, Maria ;
Mihailescu, Cristian Nicolae ;
Dulama, Ioana Daniela ;
Teodorescu, Sofia ;
Bucurica, Ioan Alin .
COATINGS, 2020, 10 (04)
[3]   Deposition of Aluminide Coatings onto AISI 304L Steel for High Temperature Applications [J].
Anwer, Zubia ;
Tufail, Muhammad ;
Chandio, Ali Dad .
MATERIALS, 2022, 15 (12)
[4]  
Asraff A., 2018, P FATIGUE DURABILITY, P7
[5]   Thermal oxidation kinetics and oxide scale adhesion of Fe-15Cr alloys as a function of their silicon content [J].
Bamba, G. ;
Wouters, Y. ;
Galerie, A. ;
Charlot, F. ;
Dellali, A. .
ACTA MATERIALIA, 2006, 54 (15) :3917-3922
[6]   Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti,Al)N, TiN and Cr-N coatings [J].
Batista, JCA ;
Godoy, C ;
Matthews, A .
TRIBOLOGY INTERNATIONAL, 2002, 35 (06) :363-372
[7]   Application and Development Progress of Cr-Based Surface Coating in Nuclear Fuel Elements: II. Current Status and Shortcomings of Performance Studies [J].
Chen, Huan ;
Wang, Xiaoming ;
Zhang, Ruiqian .
COATINGS, 2020, 10 (09)
[8]  
Godlewski J., 1990, P AM SOC TEST MAT AS
[9]  
Gokhale A.B., 1987, Journal of Phase Equilibria, V8, P474, DOI 10.1007/BF02893156
[10]   KINETICS OF THE OXIDATION OF CHROMIUM [J].
GULBRANSEN, EA ;
ANDREW, KF .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1957, 104 (06) :334-338