Fatigue Behavior and Fracture Features of Ti-15Mo Alloy in β-, (α plus β)-, and Ultrafine-Grained Two-Phase States

被引：5
作者：
Gatina, Svetlana A. [1 ]
Polyakova, Veronika V. [1 ]
Modina, Iuliia Mikhailovna [1 ]
Semenova, Irina P. [1 ]
机构：
[1] Ufa Univ Sci & Technol, Lab Multifunct Mat, Ufa 450076, Russia
来源：
METALS | 2023年 / 13卷 / 03期
基金：
俄罗斯科学基金会;
关键词：
metastable beta-Ti alloys; ultrafine-grained structure; fatigue endurance limit; high-cycle fatigue; fractographic analysis; TITANIUM-ALLOY; NANOSTRUCTURED MATERIALS; DEFORMATION-BEHAVIOR; STRENGTH; PHASE; TI;
D O I：
10.3390/met13030580
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the ultrafine-grained structure formed by equal-channel angular pressing via the "Conform" scheme on the fatigue behavior of metastable beta-alloy Ti-15Mo has been studied. It is shown that the alloy with a two-phase ultrafine-grained structure achieved the best mechanical properties and enhanced fatigue endurance limit (up to 710 MPa on the basis of 10(7) cycles) due to the total contribution of grain boundary, dislocation, and phase strengthening mechanisms. A fractographic analysis of the fracture surface of samples after fatigue tests showed the features of fatigue crack propagation depending on the type of alloy microstructure. The general and distinctive features of fatigue failure of alloy samples in the initial coarse-grained (alpha + beta)-, single-phase coarse-grained beta-, and ultrafine-grained (alpha + beta)-states are revealed. In all of the samples, a fatigue crack nucleated on the surface and propagated downward, i.e., perpendicular to the direction of the applied pressures. It is shown that fracture surfaces of the ultrafine-grained samples had a high roughness and were characterized by the presence of a large number of secondary cracks, as compared to the coarse-grained analogues.
引用
收藏
页数：15
相关论文
共 50 条
  • [31] THE SPECIAL FEATURES OF THE DEFORMATION BEHAVIOR OF AN ULTRAFINE-GRAINED ALUMINUM ALLOY OF THE Al-Mg-Li SYSTEM AT ROOM TEMPERATURE
    Naydenkin, E. V.
    Mishin, I. P.
    Ivanov, K. V.
    Russian Physics Journal, 2015, 57 (12) : 1705 - 1708
  • [32] High-Cycle Fatigue Behavior of the Ultrafine-Grained Commercially Pure Zirconium by ECAP plus RS Process
    Yang Xirong
    Liu Feng
    Leo Lei
    Feng Guanghai
    Liu Xiaoyan
    Zhao Xicheng
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (08) : 2609 - 2615
  • [33] Evolution of the Structural-Phase State of a Titanium Alloy of the System Ti–Al–V–Mo During Formation of an Ultrafine-Grained Structure Using Reversible Hydrogenaтion
    G. P. Grabovetskaya
    O. V. Zabudchenko
    I. P. Mishin
    E. N. Stepanova
    I. V. Ratochka
    O. N. Lykova
    Russian Physics Journal, 2019, 62 : 1330 - 1337
  • [34] Evolution of the Structural-Phase State of a Titanium Alloy of the System Ti-Al-V-Mo During Formation of an Ultrafine-Grained Structure Using Reversible Hydrogenaion
    Grabovetskaya, G. P.
    Zabudchenko, O. V.
    Mishin, I. P.
    Stepanova, E. N.
    Ratochka, I. V.
    Lykova, O. N.
    RUSSIAN PHYSICS JOURNAL, 2019, 62 (08) : 1330 - 1337
  • [35] The Mechanics of Machining Ultrafine-Grained Ti-6Al-4Mo Alloy Processed Severe Plastic Deformation
    Symonova A.
    Filippi E.
    Kmec J.
    Majernik J.
    Karkova M.
    Manufacturing Technology, 2017, 17 (04): : 54 - 55
  • [36] Superplastic Behavior and Microstructural Features of the VT6 Titanium Alloy with an Ultrafine-Grained Structure during Upsetting
    Dyakonov, Grigory S.
    Stotskiy, Andrey G.
    Modina, Iuliia M.
    Semenova, Irina P.
    MATERIALS, 2023, 16 (04)
  • [37] Enhanced Creep Resistance of an Ultrafine-Grained Ti-6Al-4V Alloy with Modified Surface by Ion Implantation and (Ti plus V)N Coating
    Semenova, Irina P.
    Selivanov, Konstantin S.
    Valiev, Roman R.
    Modina, Iulia M.
    Smyslova, Marina K.
    Polyakov, Alexander V.
    Langdon, Terence G.
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (10)
  • [38] Effect of annealing on the superplastic properties of ultrafine-grained Ti-5Al-5V-5Mo-1Cr-1Fe alloy
    Ratochka, I. V.
    Mishin, I. P.
    Lykova, O. N.
    Naydenkin, E. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 803
  • [39] Specific features of static, impact, and fatigue fracture of the 0.09%C-0.08%Mo-0.03%Nb-0.06%V steel with ultrafine-grained structure
    Botvina, L. R.
    Tyutin, M. R.
    Levin, V. P.
    Demina, Y. A.
    Panteleev, I. A.
    Dobatkin, S. V.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 281 - 286
  • [40] Superplastic-Like Behavior and Enhanced Strength of a Two-Phase Titanium Alloy with Ultrafine Grains
    Dyakonov, Grigory S.
    Raab, Georgy I.
    Pesin, Mikhail V.
    Polyakov, Alexander V.
    Semenova, Irina P.
    Valiev, Ruslan Z.
    ADVANCED ENGINEERING MATERIALS, 2022, 24 (08)
12345