Hybrid effect on tensile, flexural, and quasi-static punch shear behavior of jute/ramie and jute/flax reinforced hybrid composites

被引：5
作者：
Keles, Ozlem [1 ]
Bati, Serkan [1 ]
Celik, Yahya Hisman [1 ]
机构：
[1] Batman Univ, Dept Mech Engn, Batman, Turkiye
来源：
MATERIALS TESTING | 2024年 / 66卷 / 06期
关键词：
flax; hybrid composite; jute; QSPST; ramie; MECHANICAL-PROPERTIES; DAMAGE MECHANISM; IMPACT;
D O I：
10.1515/mt-2023-0383
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The high specific properties and environmental durability of synthetic fibers make them a popular choice for reinforcing lightweight composites. Unfortunately, they are often limited by their poor biodegradability and high cost. Nevertheless, natural fibers are critical in industrial applications due to their environmental and economic benefits. This study investigated the tensile and flexural behavior of natural hybrid jute/ramie and jute/flax composites with different stacking sequences. A quasi-static punch shear test was also performed to understand their deformation behavior. Jute, ramie, and flax composites have also been fabricated for comparison. Tensile and flexural tests showed a positive hybrid effect in some samples, whereas flax-jute hybrid composites in two different stacking sequences exhibited a synergistic effect. While a maximum improvement of 37.99 % was achieved in the tensile test, this rate was 64.81 % in the flexural test with these hybrid composites. According to punch shear experiments, punch geometry and stacking sequence considerably impact punch shear strength, energy absorption capacity, and deformation.
引用
收藏
页码：802 / 816
页数：15
相关论文
共 47 条
[1]   Influence of reinforcement architecture on static and dynamic mechanical properties of flax/epoxy composites for structural applications [J].
Ahmad, Furkan ;
Yuvaraj, N. ;
Bajpai, Pramendra Kumar .
COMPOSITE STRUCTURES, 2021, 255
[2]   The Effect of Hybridization on the GFRP Behavior under Quasi-Static Penetration [J].
Al-Kinani, R. ;
Najim, F. ;
de Moura, M. F. S. F. .
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2014, 21 (02) :81-87
[3]   Low velocity impact response of sandwich composites with hybrid glass/natural fiber face-sheet and PET foam core [J].
Al-Shamary, Aidel Kadum Jassim ;
Karakuzu, Ramazan ;
Kandas, Halis ;
Ozdemir, Okan .
MATERIALS TESTING, 2022, 64 (10) :1465-1479
[4]   Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer [J].
Al-Shamary, Aidel Kadum Jassim ;
Karakuzu, Ramazan ;
Kandas, Halis ;
Ozdemir, Okan .
MATERIALS TESTING, 2022, 64 (06) :780-786
[5]   Quasi-static indentation properties of damaged glass/epoxy composite laminates repaired by the application of intra-ply hybrid patches [J].
Andrew, J. Jefferson ;
Arumugam, V. ;
Ramesh, C. ;
Poorani, S. ;
Santulli, C. .
POLYMER TESTING, 2017, 61 :132-145
[6]  
[Anonymous], 2019, PART B, V167, P342, DOI [10.1016/j.compositesb.2018.12.049.[49]A., DOI 10.1016/J.COMPOSITESB.2018.12.049.[49]A]
[7]  
[Anonymous], 2020, INT J ADV DES MANUF, V108, P895, DOI [10.1007/s00170-020-05427-2, DOI 10.1007/S00170-020-05427-2]
[8]   Jute Based Bio and Hybrid Composites and Their Applications [J].
Ashraf, Muhammad Ahsan ;
Zwawi, Mohammed ;
Mehran, Muhammad Taqi ;
Kanthasamy, Ramesh ;
Bahadar, Ali .
FIBERS, 2019, 7 (09)
[9]   Mechanical characterization and damage mechanism of a new flax-Kevlar hybrid/epoxy composite [J].
Audibert, Clement ;
Andreani, Anne-Sophie ;
Laine, Eric ;
Grandidier, Jean-Claude .
COMPOSITE STRUCTURES, 2018, 195 :126-135
[10]   The investigation of quasi-static indentation effect on laminated hybrid composite plates [J].
Bulut, Mehmet ;
Erklig, Ahmet .
MECHANICS OF MATERIALS, 2018, 117 :225-234
12345