Aptness of nano alumina (Al2O3) with high range water reducer-incorporated concrete

被引:1
作者
Peerzada, Mudasir [1 ]
Adnan, Khan [2 ]
Bilal, Basrah [2 ]
Janees, Riyaz [2 ]
Qazi, Bazila [2 ]
Javed, Naqash Ahmed [1 ]
机构
[1] Natl Inst Technol, Dept Civil Engn, Srinagar, Jammu & Kashmir, India
[2] SSM Coll Engn & Technol, Dept Civil Engn, Srinagar, India
关键词
Concrete; Poly carboxylate based ether (PCE); Nano alumina; Compressive strength; Flexural strength; XRD; Calcium aluminum silicate; NANO-FE2O3; POWDERS; CEMENT MORTAR; NANO-SIO2; STRENGTH; ASH; NANOPARTICLES; PERMEABILITY; NANO-AL2O3; ENERGY;
D O I
10.1108/WJE-01-2022-0020
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Purpose The purpose of this paper is to study the effect of nano alumina (Al2O3) on the properties of fresh concrete, hardened concrete and microstructure of concrete incorporated with high range water reducer (HRWR). This initiative was taken to improve characteristic properties of concrete using nano alumina because nano alumina can be easily be manufactured from a scrap of industrial aluminum products, so its incorporation in concrete will not only reduce industrial aluminum waste but will also change the morphology of concrete at the microstructural level. Design/methodology/approach To accomplish the objectives of the research, four different concrete mixes with the constant water-cement ratio (W/C) and superplasticizer (SP) content 0.4 and 0.6% by weight of cement, respectively, were prepared, whereas nano alumina content was altered by 0.3% and 0.4% by weight of cement. Fresh property of concrete was analyzed by using slump cone test, whereas hardened properties of concrete were analyzed through compression test and flexural strength test. The interaction of nano alumina with concrete composite was evaluated using an X-ray diffraction test. Findings It was observed that 0.6% superplasticizer by weight of cement increased workability by 22% but with the addition of 0.3%, nano alumina by weight of cement workability decreased by 31%. Compressive strength increased by 4.88% with the addition of 0.6% superplasticizer but with the addition of 0.3% nano alumina by weight of cement compressive strength increased by 18.60%. Also, flexural strength increased by 1.21% with the addition of 0.6% superplasticizer by weight of cement but with the addition of 0.3% nano alumina by weight of cement flexural strength increased by 8.76%. With the addition of superplasticizer, alite and belite phases remained un-hydrated but with the addition of nano alumina alite phase was hydrated while belite phase was un-hydrated. The size of belite crystals in mixes having nano alumina was less than that of mix having 0.6% superplasticizer. Also with the addition of nano alumina, a calcium aluminum silicate phase was formed which was responsible for the increment of strength in mixes having nano alumina. Originality/value Incorporation nano alumina (Al2O3) in concrete will not only reduce industrial aluminum waste but will also reduce CO2 emission. Nano alumina (Al2O3) also changes morphology of concrete at micro structural level.
引用
收藏
页码:746 / 753
页数:8
相关论文
共 32 条
  • [1] Alsadey S., 2015, J AGR SCI ENG, V1, P70
  • [2] A review of fibrous reinforcements of concrete
    Anandamurthy, Anarghya
    Guna, Vijaykumar
    Ilangovan, Manikandan
    Reddy, Narendra
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36 (07) : 519 - 552
  • [3] Ashok K., 2021, ARPN J. Eng. Appl. Sci, V16, P76
  • [4] Improving environmental sustainability of concrete products: Investigation on MWC thermal and mechanical properties
    Becchio, Cristina
    Corgnati, Stefano Paolo
    Kindinis, Andrea
    Pagliolico, Simonetta
    [J]. ENERGY AND BUILDINGS, 2009, 41 (11) : 1127 - 1134
  • [5] The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings
    Blengini, Gian Andrea
    Di Carlo, Tiziana
    [J]. ENERGY AND BUILDINGS, 2010, 42 (06) : 869 - 880
  • [6] Improvement of initial mechanical strength by nanoalumina in belite cements
    Campillo, I.
    Guerrero, A.
    Dolado, J. S.
    Porro, A.
    Ibanez, J. A.
    Goni, S.
    [J]. MATERIALS LETTERS, 2007, 61 (8-9) : 1889 - 1892
  • [7] Material properties of portland cement paste with nano-montmorillonite
    Chang, Ta-Peng
    Shih, Jeng-Ywan
    Yang, Kuo-Ming
    Hsiao, Tien-Chin
    [J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (17) : 7478 - 7487
  • [8] Characterization of high strength mortars with nano alumina at elevated temperatures
    Farzadnia, Nima
    Ali, Abang Abdullah Abang
    Demirboga, Ramazan
    [J]. CEMENT AND CONCRETE RESEARCH, 2013, 54 : 43 - 54
  • [9] Modelling of the microstructure and transport properties of concrete
    Garboczi, EJ
    Bentz, DP
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 1996, 10 (05) : 293 - 300
  • [10] The assessment of embodied energy in typical reinforced concrete building structures in Ireland
    Goggins, Jamie
    Keane, Treasa
    Kelly, Alan
    [J]. ENERGY AND BUILDINGS, 2010, 42 (05) : 735 - 744